SN65HVD3082EDR vs ADM483EAR Comparaison
Comparaison détaillée côte à côte de SN65HVD3082EDR par Texas Instruments et ADM483EAR par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD3082EDR - 200kbps Low-Power RS-485 | Texas Instruments
SN65HVD3082EDR ✓ ActifComparaison des spécifications
| Paramètre | SN65HVD3082EDR | ADM483EAR |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Half-duplex RS-485 transceiver | RS-485/RS-422 half-duplex line transceiver |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Signaling Rate | Up to 200 kbps | — |
| Tension d'alimentation | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Active Mode Quiescent Current | 0.3 mA | — |
| Shutdown Mode Current | 1 nA | — |
| Bus Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | Up to 256 nodes | 32 transceivers |
| Bus-Pin ESD Protection | Up to 15 kV | — |
| Standard Compliance | TIA/EIA-485A | — |
| Duplex Mode | Half-duplex | Half-duplex |
| Boîtier | 8-pin SOIC | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Nominal Supply Voltage | — | 5 V |
| Maximum Data Rate | — | 250 kbps |
| ESD Protection | — | ±15 kV |
| Bus Common-Mode Range | — | -12 V to +12 V |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Slew Rate | — | Slew-rate limited |
| Interface Standards | — | TIA/EIA RS-485 and RS-422 |
| Statut du cycle de vie | — | Production |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |