SN65LVDS93ADGGR vs DS90LV018ATM Comparaison

Comparaison détaillée côte à côte de SN65LVDS93ADGGR par Texas Instruments et DS90LV018ATM par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
SN65LVDS93ADGGR SN65LVDS93ADGGR - LVDS Serializer 10-135MHz 56-TSSOP | TI

SN65LVDS93ADGGR - LVDS Serializer 10-135MHz 56-TSSOP | TI

SN65LVDS93ADGGR ✓ Actif
Texas Instruments
DS90LV018ATM DS90LV018ATM - 400 Mbps LVDS Receiver | Texas Instruments

DS90LV018ATM - 400 Mbps LVDS Receiver | Texas Instruments

DS90LV018ATM ✓ Actif

Comparaison des spécifications

Paramètre SN65LVDS93ADGGR DS90LV018ATM
Marque Texas Instruments Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Fonction LVDS SerDes Transmitter (Serializer), FlatLink —
Input Channels 28 (single-ended LVTTL parallel data) —
Output Channels 4 LVDS data pairs + 1 LVDS clock pair —
Serialization Ratio 28:4 —
Input Clock Range 10 MHz to 135 MHz (SN65LVDS93A) —
Throughput Up to 1.904 Gbps serialized —
Clock Synthesizer 7x clock multiplication PLL —
Tension d'alimentation 3.3 V (typical) 3 V
Supply Current (Max) [DATA_NEEDED: Supply Current Max] —
Differential Output Swing Approx. 350 mV (LVDS, TIA/EIA-644) —
Température de fonctionnement -40C to +85C —
Boîtier 56-TSSOP (DGG), 56-TFSOP, 6.10 mm width 8-pin SOIC
Type de montage Surface Mount Surface mount
Protocol / Interface LVDS (FlatLink transmitter) —
Data Rate Classification 10 MHz - 135 MHz LVDS SerDes Transmitter —
Statut RoHS unknown [DATA_NEEDED: RoHS status]
Product Type — LVDS single differential line receiver
Logic Family — CMOS
Maximum Data Rate — Greater than 400 Mbps
Fréquence d'horloge maximale — 200 MHz
Typical Differential Input Voltage — 350 mV
Output Logic Level — 3 V CMOS
Propagation Delay — 1.5 ns
Courant de repos — 9 mA
Plage de température de fonctionnement — -40 °C to +85 °C
Fail-Safe Input Support — Open, shorted, and 100 Ω terminated inputs
Fail-Safe Output State — HIGH
PCB Layout Style — Flow-through
REACH Status — [DATA_NEEDED: REACH status]
Lead-Free Status — [DATA_NEEDED: lead-free status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis