SN74LVC1G3157DCKR vs 74LVC1G3157GW Comparaison
Comparaison détaillée côte à côte de SN74LVC1G3157DCKR par Texas Instruments et 74LVC1G3157GW par Nexperia. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN74LVC1G3157DCKR - SPDT Analog Switch, 15Ohm, SC-70-6 | TI
SN74LVC1G3157DCKR ✓ Actif
Comparaison des spécifications
| Paramètre | SN74LVC1G3157DCKR | 74LVC1G3157GW |
|---|---|---|
| Marque | Texas Instruments | Nexperia |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,22 | $0,11 |
| Fonction | Single-Pole Double-Throw (SPDT) Analog Switch | Single-Pole Double-Throw (SPDT) Analog Switch / 2:1 Multiplexer |
| Number of Channels | 1 | 1 |
| Configuration | 2:1 (1 of 2) | — |
| On-State Resistance (Ron) | 15 ohm (typical) | — |
| Supply Voltage (VCC) | 1.65 V to 5.5 V | 1.65 V to 5.5 V |
| Signal Path Voltage Range | 0 V to VCC (rail-to-rail) | — |
| Bandwidth | 340 MHz (typical) | — |
| Propagation Delay | 0.5 ns typical at 50 pF | — |
| On-State Resistance Flatness | Low (per datasheet curves) | — |
| Quiescent Current (ICC) | <1 uA typical | — |
| Control Input Logic Levels | 1.8V CMOS compatible at VCC=2.7V-5.5V | — |
| Switching Behavior | Break-before-make | — |
| Plage de température de fonctionnement | -40C to +85C | — |
| ESD Protection | 2 kV HBM (per JESD22) | — |
| Boîtier | SC-70-6 (DCK) 2.0 mm x 1.25 mm | TSSOP-6 (SOT363, SC-88) |
| Type de montage | Surface Mount | Surface Mount |
| MSL (Moisture Sensitivity Level) | 1 (unlimited floor life) | — |
| RoHS / Lead-Free | Yes / Yes | — |
| On Resistance (RON) | — | 10 Ω (typical) |
| ON Resistance at VCC=2.7V | — | 7.5 Ω (typical) |
| ON Resistance at VCC=3.3V | — | 6.5 Ω (typical) |
| ON Resistance at VCC=5V | — | 6 Ω (typical) |
| Switch Current Capability | — | 32 mA |
| Switching Type | — | Break-before-make |
| Input Compatibility | — | 3.3 V and 5 V TTL/CMOS control inputs |
| ESD Protection (HBM) | — | Exceeds 2000 V per JESD22-A114F |
| Latch-up Performance | — | Meets JESD 78 Class I |
| Température de fonctionnement | — | -40 °C to +125 °C |
| Niveau MSL | — | 1 (unlimited) |
| Statut RoHS | — | Compliant |