SP485 vs SP485REP-L Comparaison
Comparaison détaillée côte à côte de SP485 par MaxLinear et SP485REP-L par Exar Corporation. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | SP485 | SP485REP-L |
|---|---|---|
| Marque | MaxLinear | Exar Corporation |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Protocol | RS-485, RS-422 | — |
| Fonction | Transceiver | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half-Duplex | — |
| Débit de données | 5 Mbps | — |
| Tension d'alimentation | 5 V | — |
| Operating Supply Current | [DATA_NEEDED: typical quiescent current in mA] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: min/max operating temperature in °C] | — |
| Common-Mode Range | −7 V to +12 V | — |
| Driver Output Current | ±60 mA | — |
| Receiver Hysteresis | [DATA_NEEDED: typical hysteresis in mV] | — |
| ESD Protection (HBM, Bus Pins) | ±15 kV | — |
| Boîtier | 8-Pin SOIC (NSOIC) | 8-pin plastic DIP |
| Type de montage | Surface Mount | Through-hole |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | Half-duplex RS-485/RS-422 transceiver |
| Receiver Unit Load | — | 1/10 unit load |
| Supported Transceivers per Line | — | More than 400 transceivers |
| Receiver Input Impedance | — | 150 kOhm typical |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Propagation Delay | — | 60 ns |
| Minimum Operating Temperature | — | -40 C |
| Maximum Operating Temperature | — | +85 C |
| Duplex Configuration | — | Half-duplex |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Configuration | — | 1/1 differential driver |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |