SP485ECN-L vs MAX485ECSA+ Comparaison
Comparaison détaillée côte à côte de SP485ECN-L par MaxLinear et MAX485ECSA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
MaxLinear
SP485ECN-L - 10Mbps Half-Duplex RS-485 Transceiver | MaxLinear (Tape & Reel)
SP485ECN-L ✓ ActifComparaison des spécifications
| Paramètre | SP485ECN-L | MAX485ECSA+ |
|---|---|---|
| Marque | MaxLinear | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-422/RS-485 half-duplex line transceiver | Half-duplex RS-485/RS-422 line transceiver |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Tension d'alimentation | 5 V | — |
| Protocol Support | RS-422 and RS-485 | — |
| Duplex Mode | Half-duplex | — |
| Débit de données | 10 Mbps for SP485ECN-L; SP485 family supports up to 5 Mbps | — |
| Technology | BiCMOS | CMOS |
| Boîtier | 8-pin SOIC | 8-SOIC (0.150 inch, MS-012A) |
| Package Width | 0.154 in (3.90 mm) | — |
| Type de montage | Surface mount | Surface Mount |
| Packaging | Tape and reel | — |
| Human Body Model ESD Tolerance | Over ±15 kV | — |
| IEC 61000-4-2 Air Discharge ESD Tolerance | Over ±15 kV | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | [DATA_NEEDED: typical and maximum supply current] | — |
| Differential Input Voltage | [DATA_NEEDED: receiver input voltage range] | — |
| Output Current | [DATA_NEEDED: driver output current] | — |
| Shutdown Support | Not stated for SP485ECN-L in the verified data | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | Lead-free product marking is stated in the verified search data | — |
| Transceiver Configuration | — | 1 driver, 1 receiver |
| Maximum Data Rate | — | 2.5 Mbps |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Interface Standard | — | RS-485 and RS-422 |
| Driver Output Protection | — | 15 kV ESD |
| Receiver Input Protection | — | 15 kV ESD |
| Driver Output Type | — | Slew-rate-limited |
| Power Consumption | — | [DATA_NEEDED: power consumption] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Maximum Bus Nodes | — | [DATA_NEEDED: maximum bus nodes] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Tension d'alimentation de fonctionnement | — | [DATA_NEEDED: operating supply voltage] |