SP485ECP-L vs SP485R Comparaison
Comparaison détaillée côte à côte de SP485ECP-L par Exar Corporation et SP485R par MaxLinear. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Exar Corporation
SP485ECP-L - RS-485 Transceiver | Exar | Industrial Communication
SP485ECP-L ✓ ActifComparaison des spécifications
| Paramètre | SP485ECP-L | SP485R |
|---|---|---|
| Marque | Exar Corporation | MaxLinear |
| Catégorie | RS-485 Transceivers | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485 transceiver | — |
| Number of Channels | 1 channel | — |
| Interface Standard | RS-485 | — |
| Tension d'alimentation | [DATA_NEEDED: supply voltage] | 4.75 V to 5.25 V |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Differential Output Voltage | [DATA_NEEDED: differential output voltage] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Bus Load Current | [DATA_NEEDED: bus load current] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Boîtier | [DATA_NEEDED: exact package and pin count] | 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP |
| Type de montage | Surface Mount | Surface Mount (SOIC) / Through-Hole (PDIP) |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Statut RoHS | unknown | [DATA_NEEDED: rohs status] |
| REACH Status | unknown | — |
| Lead-Free Status | unknown | — |
| Halogen-Free Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Manufacturer | Exar | — |
| Fonction | — | Transceiver |
| Protocol | — | RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis mV] |
| Débit de données | — | 5 Mbps |
| Température de fonctionnement | — | [DATA_NEEDED: operating temperature range C] |
| Receiver Input Impedance (RIN) | — | 120 kOhm minimum, 150 kOhm typical (1/10 unit load) |
| Bus Loading | — | 1/10 unit load (supports 400+ transceivers on bus) |
| Input Sensitivity | — | +/-200 mV |
| Common-Mode Input Voltage Range | — | -7 V to +12 V |
| Shutdown Mode | — | Yes |
| Pin-to-Pin Equivalent | — | SP485 (with higher RIN) |