SP485EEN-L vs MAX485ESA+ Comparaison
Comparaison détaillée côte à côte de SP485EEN-L par MaxLinear et MAX485ESA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | SP485EEN-L | MAX485ESA+ |
|---|---|---|
| Marque | MaxLinear | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Half-duplex RS-422/RS-485 transceiver | — |
| Transmitter and Receiver Count | 1 transmitter and 1 receiver | — |
| Débit de données | 10,000 kbps | 2.5 Mbps |
| Alternate Family Data Rate | Up to 5 Mbps | — |
| Tension d'alimentation de fonctionnement | 4.75 V to 5.25 V | — |
| Plage de température de fonctionnement | -40 C to +85 C | — |
| Boîtier | 8-pin SOIC | 8-SOIC (SOIC-8) |
| Type de montage | Surface mount | Surface Mount |
| ESD Tolerance, Human Body Model | Greater than 15 kV | — |
| ESD Tolerance, Air Discharge Method | Greater than 15 kV under IEC1000-4-2 | — |
| Supported Protocols | RS-422 and RS-485 | — |
| Duplex Mode | Half-duplex | — |
| Power Classification | Low-power interface IC | — |
| EMI Characteristics | Enhanced low-EMI design | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Fonction | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Tension d'alimentation | — | 4.75 V to 5.25 V (5 V nominal) |
| Supply Current (unloaded) | — | 120 µA to 500 µA |
| Receiver Hysteresis | — | 70 mV (typ) |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold (V_TH) | — | -0.2 V min / +0.2 V max |
| ESD Protection (HBM, driver output) | — | ±15 kV (per datasheet) |
| Unit Load | — | 1/8 (up to 256 transceivers on bus) |
| Température de fonctionnement | — | -40 °C to +85 °C |
| Statut RoHS | — | Compliant (per Maxim/ADI datasheet suffix '+') |