SP485EN-L vs MAX485EESA+ Comparaison
Comparaison détaillée côte à côte de SP485EN-L par MaxLinear et MAX485EESA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ ActifComparaison des spécifications
| Paramètre | SP485EN-L | MAX485EESA+ |
|---|---|---|
| Marque | MaxLinear | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $1,42 |
| Product Type | Half-duplex differential transceiver | RS-485/RS-422 Transceiver |
| Interface Standards | RS-422 and RS-485 | — |
| Maximum Data Rate | 5 Mbps | — |
| Supply Voltage Range | 4.75V to 5.25V | — |
| Nominal Supply Voltage | 5 V | — |
| Plage de température de fonctionnement | -40°C to +85°C | -40 °C to +85 °C |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Duplex Mode | Half-duplex | — |
| Receiver Input Type | Differential Schmitt-trigger input | — |
| Process Technology | BiCMOS | — |
| Boîtier | 8-pin SOIC | — |
| Package Width | 3.9 mm | — |
| Package Length | 4.9 mm | — |
| Type de montage | Surface mount | Surface Mount |
| Transceiver Count per Package | 1 | — |
| Supply Decoupling Requirement | [DATA_NEEDED: recommended decoupling capacitor value and ESR] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: receiver and driver propagation delay] | — |
| Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Shutdown Function | [DATA_NEEDED: shutdown or power-save support] | — |
| Statut RoHS | unknown | — |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Protocol | — | RS-485, RS-422 |
| Duplex | — | Half-Duplex |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Débit de données | — | Up to 2.5 Mbps |
| ESD Protection (Bus Pins, HBM) | — | ±15 kV |
| Driver Slew Rate | — | Limited (low-EMI) |
| Quiescent Supply Current | — | 1 mA (typical) |
| Number of Nodes on Bus | — | 32 (1/2 unit load) |
| Receiver Input Impedance | — | 96 kΩ (1/2 unit load) |
| Boîtier / Format | — | 8-pin SOIC (SO-8, 3.9 mm body) |
| Lead-Free / RoHS Status | — | Lead-Free, RoHS compliant |
| Niveau MSL | — | 1 (Unlimited) |