ST1S10PHR vs ST1S41PUR Comparaison

Comparaison détaillée côte à côte de ST1S10PHR par STMicroelectronics et ST1S41PUR par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

STMicroelectronics
ST1S41PUR ST1S41PUR - 4A 18V Sync Step-Down DC-DC | STMicroelectronics

ST1S41PUR - 4A 18V Sync Step-Down DC-DC | STMicroelectronics

ST1S41PUR ✓ Actif

Comparaison des spécifications

Paramètre ST1S10PHR ST1S41PUR
Marque STMicroelectronics STMicroelectronics
Catégorie DC-DC Converters DC-DC Converters
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $0,78 $0,92
Topologie Synchronous Step-Down (Buck) Synchronous Buck (Step-Down) DC-DC Converter
Plage de tension d'entrée 2.5 V to 18 V 4.0 V to 18 V
Plage de tension de sortie 0.8 V to 0.85 x VIN (adjustable) 0.8 V to VIN (adjustable)
Courant de sortie maximal 3 A 4 A continuous
Fréquence de commutation 900 kHz fixed (400 kHz to 1.2 MHz with external sync) 850 kHz nominal (700 kHz to 1 MHz adjustable)
Control Mode Peak Current-Mode PWM —
High-Side MOSFET RDS(on) [DATA_NEEDED: RDS(on) high-side typical value] —
Low-Side MOSFET RDS(on) [DATA_NEEDED: RDS(on) low-side typical value] —
Typical Quiescent Current 1.5 mA —
Rendement Up to 90 % at full load —
Tension de rétroaction 0.8 V (VFB reference) —
Plage de température de fonctionnement -40 °C to +125 °C -40 °C to +125 °C junction
Boîtier PowerSO-8 (HSOP-8) exposed pad VFQFPN-8 (3x3 mm) with exposed thermal pad
Type de montage Surface Mount Surface Mount
Niveau MSL 3 (per JEDEC J-STD-020) 1
Synchronization Input Yes (SYNC/INH pin, 400 kHz to 1.2 MHz) —
Protection Features Cycle-by-cycle current limit, thermal shutdown, internal soft-start Overcurrent, Thermal Shutdown, Cycle-by-Cycle Current Limit
Statut RoHS Compliant Compliant
High-Side Switch Rds(on) — 95 mΩ
Low-Side Switch Rds(on) — 69 mΩ (synchronous rectifier)
Control Method — Peak Current-Mode PWM with Internal Compensation
Peak Efficiency — Up to 90%
Courant de repos — 1.5 mA typical
Démarrage progressif — Internal

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis