STM32F105RCT6 vs STM32F205RET6 Comparaison
Comparaison détaillée côte à côte de STM32F105RCT6 par STMicroelectronics et STM32F205RET6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F105RCT6 - 32-bit Cortex-M3 256KB Flash MCU | STMicroelectronics
STM32F105RCT6 ✓ ActifSTMicroelectronics
STM32F205RET6 - ARM Cortex-M3 MCU 120MHz 512KB | STMicroelectronics
STM32F205RET6 ✓ ActifComparaison des spécifications
| Paramètre | STM32F105RCT6 | STM32F205RET6 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,85 | $7,95 |
| Core Architecture | ARM Cortex-M3 32-bit RISC | ARM Cortex-M3 32-bit RISC |
| Maximum CPU Frequency | 72 MHz | — |
| CoreMark / DMIPS | 90 DMIPS (1.25 DMIPS/MHz) | — |
| Flash Memory | 256 KB | — |
| SRAM | 64 KB | 132 KB (128 KB + 4 KB backup) |
| Operating Voltage | 2.0 V to 3.6 V | 1.8 V - 3.6 V |
| Boîtier | 64-pin LQFP | 64-LQFP (10x10 mm, 0.5 mm pitch) |
| Type de montage | Surface Mount | Surface Mount (Tray) |
| Plage de température de fonctionnement | -40 C to +85 C (grade 6) | — |
| CAN Interfaces | 2 x CAN 2.0B (1 Mbit/s) | — |
| USB | USB OTG Full-Speed with on-chip PHY | — |
| Ethernet | Not available on F105 (use F107 variant) | — |
| ADC | 2 x 12-bit, up to 1 MSPS | — |
| Timers | 4 x 16-bit general, 1 x 16-bit advanced, 2 x watchdog | 17 (incl. advanced-control 16-bit, basic, watchdog, SysTick, RTC) |
| DMA Channels | 7-channel DMA | — |
| I/O Count (approx.) | 51 GPIO | — |
| Communication Peripherals | 5x USART, 3x SPI, 2x I2C, 2x CAN, USB OTG | — |
| RoHS Compliance | Compliant | — |
| Fréquence d'horloge maximale | — | 120 MHz |
| CoreMark / DMIPS Performance | — | 150 DMIPS / 1.25 DMIPS/MHz |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| Program (Flash) Memory | — | 512 KB |
| GPIOs | — | 51 |
| ADCs | — | 3 x 12-bit, up to 24 channels |
| DACs | — | 2 x 12-bit |
| Communication Interfaces | — | USB OTG HS + USB OTG FS, 10/100 Ethernet MAC, 2x CAN 2.0B, 6x USART/UART, 3x SPI, 2x I2C, SDIO |
| External Memory Controller | — | FSMC (NOR/PSRAM/NAND 16-bit, 8080/6800) |
| Température de fonctionnement | — | -40 C to +85 C |
| Statut RoHS | — | Compliant |
| MPU | — | Yes |