STM32F411RCT7 vs STM32F429VGT6 Comparaison
Comparaison détaillée côte à côte de STM32F411RCT7 par STMicroelectronics et STM32F429VGT6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F411RCT7 - 100MHz 256KB MCU 64-LQFP | STMicroelectronics
STM32F411RCT7 ✓ ActifSTMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ ActifComparaison des spécifications
| Paramètre | STM32F411RCT7 | STM32F429VGT6 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,13 | $10,85 |
| Core | Arm Cortex-M4 32-bit RISC | ARM Cortex-M4 with FPU and DSP instructions |
| Maximum Core Frequency | 100 MHz | — |
| Flash Memory | 256 KB | 1 MB |
| SRAM | [DATA_NEEDED: SRAM size] | 192 KB (including 4 KB backup SRAM) |
| Architecture | 32-bit MCU with FPU and DSP capability | — |
| USB Interface | USB OTG FS | — |
| Timer Count | 11 timers | — |
| ADC Count | 1 ADC | — |
| Communication Interface Count | 13 communication interfaces | — |
| Boîtier | 64-LQFP, 10 x 10 mm | LQFP-100 (14 x 14 mm) |
| Type de montage | Surface mount | Surface Mount |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 C to +85 C (grade 6) |
| Tension d'alimentation | [DATA_NEEDED: supply voltage range] | — |
| Maximum GPIO Count | [DATA_NEEDED: GPIO count] | — |
| PWM Capability | [DATA_NEEDED: PWM channel and timer details] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 status] | — |
| CPU Maximum Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| Operating Voltage | — | 1.8 V to 3.6 V |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| MPU | — | Yes (memory protection unit) |
| LCD-TFT Controller | — | Yes, up to XGA resolution |
| DMA2D (Chrom-ART) | — | Yes |
| USB OTG | — | HS + FS (with on-chip PHY) |
| Ethernet MAC | — | 10/100 with IEEE 1588v2 |
| CAN Controllers | — | 2 x CAN 2.0B active |
| ADC | — | 3 x 12-bit, up to 2.4 MSPS |
| DAC | — | 2 x 12-bit |
| Timers | — | 17 (including 12 x 16-bit, 2 x 32-bit) |
| GPIOs | — | Up to 82 fast GPIOs |
| Crypto/Hash Accelerator | — | AES-128/192/256, SHA-1, MD5, 3DES |
| SDMMC | — | 1 x SDMMC host |
| Communication Peripherals | — | UART, SPI, I2C, SAI, SPDIF-Rx |
| Niveau MSL | — | 3 (168 hours) |