STM32F417IET6 vs STM32F427IIT6 Comparaison
Comparaison détaillée côte à côte de STM32F417IET6 par STMicroelectronics et STM32F427IIT6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F417IET6 - 168MHz ARM Cortex-M4F MCU | STMicroelectronics
STM32F417IET6 ✓ ActifSTMicroelectronics
STM32F427IIT6 - ARM Cortex-M4 MCU 180MHz 2MB Flash LQFP-176 | STMicroelectronics
STM32F427IIT6 ✓ ActifComparaison des spécifications
| Paramètre | STM32F417IET6 | STM32F427IIT6 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,10 | $11,20 |
| Core | ARM Cortex-M4F with FPU | — |
| Fréquence d'horloge maximale | 168 MHz | — |
| Flash Memory | 512 KB | 2 MB |
| SRAM | 192 KB | 256 KB (plus 4 KB backup SRAM) |
| Supply Voltage Range | 1.8 V to 3.6 V | — |
| Plage de température de fonctionnement | -40C to +85C | -40C to +85C (industrial grade) |
| Boîtier | LQFP176 (24x24 mm) | 176-pin LQFP (24 x 24 mm, 0.5 mm pitch) |
| GPIO Pins | 140 | — |
| ADC Resolution | 12-bit | — |
| Number of ADCs | 3 | — |
| DAC Resolution | 12-bit | — |
| Number of DACs | 2 | — |
| Timers | 14 (including 2 advanced-control) | Up to 17 (including motor-control timers) |
| Communication Interfaces | 4x USART, 2x UART, 3x SPI, 3x I2C, 2x CAN, USB 2.0 OTG FS/HS, Ethernet MAC, SDIO | — |
| Crypto/Hash Processor | AES-256, 3DES, SHA-1, SHA-256 | — |
| DMA Channels | 16 streams | — |
| Statut RoHS | Compliant | Compliant |
| Core Architecture | — | ARM Cortex-M4 with FPU and DSP instructions |
| Maximum CPU Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| Operating Voltage | — | 1.8 V to 3.6 V |
| ADC | — | 3 x 12-bit, 2.4 MSPS |
| DAC | — | 2 x 12-bit |
| USB | — | USB 2.0 OTG FS + USB 2.0 OTG HS (with on-chip PHY) |
| Ethernet | — | 10/100 MAC with IEEE 1588v2 hardware time-stamping |
| Communication Peripherals | — | UART/USART, SPI, I2C, CAN 2.0B, SAI, SDMMC |
| Graphics Accelerator | — | Chrom-ART (for TFT LCD) |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| Type de montage | — | Surface Mount (LQFP-176) |