STM32F427VGT6 vs STM32F429VGT6 Comparaison
Comparaison détaillée côte à côte de STM32F427VGT6 par STMicroelectronics et STM32F429VGT6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F427VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | STMicroelectronics
STM32F427VGT6 ✓ ActifSTMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ ActifComparaison des spécifications
| Paramètre | STM32F427VGT6 | STM32F429VGT6 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,95 | $10,85 |
| Core Architecture | ARM 32-bit Cortex-M4 with FPU and DSP | — |
| Fréquence d'horloge maximale | 180 MHz | — |
| Performance | 225 DMIPS / 1.25 DMIPS/MHz (Dhrystone 2.1) | — |
| Program Flash Memory | 1 MB (1M x 8) | — |
| SRAM | 256 KB (192 KB + 64 KB CCM) | 192 KB (including 4 KB backup SRAM) |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Supply Voltage (VDD/VDDA) | 2.0 V to 3.6 V (full performance); 1.8 V min | — |
| Boîtier | 100-pin LQFP (14x14 mm) | LQFP-100 (14 x 14 mm) |
| Plage de température de fonctionnement | -40C to +85C (grade 6) | — |
| ART Accelerator | Yes - 0-wait-state Flash execution | Yes (0-wait-state Flash execution) |
| ADC | 3 x 12-bit, 2.4 MSPS | 3 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit | 2 x 12-bit |
| Timers | Up to 17 (including 32-bit) | 17 (including 12 x 16-bit, 2 x 32-bit) |
| Communication Interfaces | USB OTG FS + HS PHY, 2x CAN 2.0B, Ethernet MAC, 6x USART/UART, 3x SPI, 4x I2C, 2x I2S, SDIO | — |
| Cryptography | AES 128/256, SHA-1/SHA-2, TRNG, hash | — |
| Display Controller | LCD-TFT (F427 line) | — |
| GPIO | Up to 114 (82 in LQFP-100) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (JEDEC J-STD-020) | 3 (168 hours) |
| Statut RoHS | Compliant | Compliant |
| Core | — | ARM Cortex-M4 with FPU and DSP instructions |
| CPU Maximum Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| Flash Memory | — | 1 MB |
| Température de fonctionnement | — | -40 C to +85 C (grade 6) |
| MPU | — | Yes (memory protection unit) |
| LCD-TFT Controller | — | Yes, up to XGA resolution |
| DMA2D (Chrom-ART) | — | Yes |
| USB OTG | — | HS + FS (with on-chip PHY) |
| Ethernet MAC | — | 10/100 with IEEE 1588v2 |
| CAN Controllers | — | 2 x CAN 2.0B active |
| GPIOs | — | Up to 82 fast GPIOs |
| Crypto/Hash Accelerator | — | AES-128/192/256, SHA-1, MD5, 3DES |
| SDMMC | — | 1 x SDMMC host |
| Communication Peripherals | — | UART, SPI, I2C, SAI, SPDIF-Rx |