STM32F429NIH6 vs STM32F429NIH6E Comparaison
Comparaison détaillée côte à côte de STM32F429NIH6 par STMicroelectronics et STM32F429NIH6E par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F429NIH6 - 180MHz ARM Cortex-M4 MCU 2MB Flash | STMicroelectronics
STM32F429NIH6 ✓ ActifSTMicroelectronics
STM32F429NIH6E - 180MHz Cortex-M4 MCU, 2MB Flash | STMicroelectronics
STM32F429NIH6E ✓ ActifComparaison des spécifications
| Paramètre | STM32F429NIH6 | STM32F429NIH6E |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Prix unitaire (USD) | $8,63 | — |
| Core Architecture | ARM 32-bit Cortex-M4 with FPU and DSP instructions | ARM 32-bit RISC |
| Maximum CPU Frequency | 180 MHz | 180 MHz |
| DMIPS | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) | — |
| Flash Memory | 2 MB dual-bank | 2 MB (2M x 8) |
| SRAM | 256 KB | 256 KB |
| Boîtier | 216-TFBGA (13x13 mm), 0.8 mm pitch | 216-TFBGA (13x13 mm, 0.8 mm pitch) |
| Tension d'alimentation | 1.8 V to 3.6 V (typ. 2.5 V / 3.3 V) | — |
| Température de fonctionnement | -40C to +85C (industrial grade) | -40 C to +85 C |
| USB | USB 2.0 OTG Full-Speed and High-Speed | USB 2.0 OTG FS + HS (with ULPI) |
| Ethernet | 10/100 MAC (IEEE 802.3) | — |
| CAN | 2x CAN 2.0B | 2x CAN 2.0B active |
| Display Controller | TFT-LCD up to 24-bit parallel RGB | — |
| ADCs | 3x 12-bit, up to 2.4 MSPS | — |
| DACs | 2x 12-bit | — |
| Timers | 17 (including 12-bit timers, PWM, low-power timers) | — |
| Cryptography | AES 128/192/256, hash (SHA-1/MD5), TRNG | — |
| Type de montage | Surface Mount (BGA) | Surface Mount |
| Niveau MSL | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL level] |
| Statut RoHS | Compliant | Compliant |
| Core | — | ARM Cortex-M4 with FPU |
| Performance | — | 225 DMIPS / 1.25 DMIPS per MHz (Dhrystone 2.1) |
| DSP Instructions | — | Yes |
| Single-Precision FPU | — | Yes |
| Operating Voltage | — | 1.8 V to 3.6 V |
| Number of I/O Pins | — | Up to 168 |
| ART Accelerator | — | Yes (0-wait-state from Flash) |
| Chrom-ART Accelerator | — | Yes (2D graphics DMA) |
| External Memory Controller (FMC) | — | Yes, supports SDRAM |
| TFT-LCD Controller | — | Yes, up to SVGA resolution |
| ADC | — | 3x 12-bit, 2.4 MSPS |
| DAC | — | 2x 12-bit |
| Crypto / Hash | — | AES, SHA, MD5, HMAC (hardware accelerators) |