STM32F429VET6 vs STM32F429VGT6TR Comparaison
Comparaison détaillée côte à côte de STM32F429VET6 par STMicroelectronics et STM32F429VGT6TR par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F429VET6 - 180MHz Cortex-M4 MCU, 512KB Flash, LQFP-100 | STMicroelectronics
STM32F429VET6 ✓ ActifSTMicroelectronics
STM32F429VGT6TR - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST
STM32F429VGT6TR ✓ ActifComparaison des spécifications
| Paramètre | STM32F429VET6 | STM32F429VGT6TR |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $9,21 | $10,85 |
| Core | Arm 32-bit Cortex-M4 with FPU | ARM Cortex-M4 with FPU and DSP instructions |
| DSP Instructions | Yes | — |
| Fréquence d'horloge maximale | 180 MHz | — |
| DMIPS | 225 DMIPS / 1.25 DMIPS per MHz (Dhrystone 2.1) | — |
| Program Flash | 512 KB | — |
| SRAM | 256 KB + 4 KB backup | 192 KB (including 4 KB backup SRAM) |
| Boîtier | LQFP-100 (14x14 mm) | LQFP-100 (14 x 14 mm) |
| Tension d'alimentation | 1.8 V to 3.6 V | — |
| Température de fonctionnement | -40C to +85C (industrial grade) | -40 C to +85 C (grade 6) |
| USB | USB OTG Full-Speed + USB OTG High-Speed (on-chip PHY) | — |
| Ethernet | 10/100 MAC (external PHY required) | — |
| TFT-LCD Controller | Yes (up to SVGA 800x600) | — |
| Camera Interface | 8- to 14-bit parallel | — |
| ADC | 3x 12-bit, 2.4 MSPS | 3 x 12-bit, up to 2.4 MSPS |
| DAC | 2x 12-bit | 2 x 12-bit |
| Timers | 17 (incl. PWM, HRTIM on some SKUs) | 17 (including 12 x 16-bit, 2 x 32-bit) |
| Communication Interfaces | Up to 20 (USART/SPI/I2C/CAN/SAI/SDIO) | — |
| Crypto | AES-128, Hash, RNG | — |
| Statut RoHS | Compliant | Compliant |
| Type de montage | Surface Mount (LQFP) | Surface Mount |
| CPU Maximum Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| Flash Memory | — | 1 MB |
| Operating Voltage | — | 1.8 V to 3.6 V |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| MPU | — | Yes (memory protection unit) |
| LCD-TFT Controller | — | Yes, up to XGA resolution |
| DMA2D (Chrom-ART) | — | Yes |
| USB OTG | — | HS + FS (with on-chip PHY) |
| Ethernet MAC | — | 10/100 with IEEE 1588v2 |
| CAN Controllers | — | 2 x CAN 2.0B active |
| GPIOs | — | Up to 82 fast GPIOs |
| Crypto/Hash Accelerator | — | AES-128/192/256, SHA-1, MD5, 3DES |
| SDMMC | — | 1 x SDMMC host |
| Communication Peripherals | — | UART, SPI, I2C, SAI, SPDIF-Rx |
| Niveau MSL | — | 3 (168 hours) |