STM32F429VGT6 vs STM32F411RCT7 Comparaison
Comparaison détaillée côte à côte de STM32F429VGT6 par STMicroelectronics et STM32F411RCT7 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ ActifSTMicroelectronics
STM32F411RCT7 - 100MHz 256KB MCU 64-LQFP | STMicroelectronics
STM32F411RCT7 ✓ ActifComparaison des spécifications
| Paramètre | STM32F429VGT6 | STM32F411RCT7 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Core | ARM Cortex-M4 with FPU and DSP instructions | Arm Cortex-M4 32-bit RISC |
| CPU Maximum Frequency | 180 MHz | — |
| DMIPS Performance | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) | — |
| Flash Memory | 1 MB | 256 KB |
| SRAM | 192 KB (including 4 KB backup SRAM) | [DATA_NEEDED: SRAM size] |
| Operating Voltage | 1.8 V to 3.6 V | — |
| Boîtier | LQFP-100 (14 x 14 mm) | 64-LQFP, 10 x 10 mm |
| Type de montage | Surface Mount | Surface mount |
| Température de fonctionnement | -40 C to +85 C (grade 6) | [DATA_NEEDED: operating temperature range] |
| ART Accelerator | Yes (0-wait-state Flash execution) | — |
| MPU | Yes (memory protection unit) | — |
| LCD-TFT Controller | Yes, up to XGA resolution | — |
| DMA2D (Chrom-ART) | Yes | — |
| USB OTG | HS + FS (with on-chip PHY) | — |
| Ethernet MAC | 10/100 with IEEE 1588v2 | — |
| CAN Controllers | 2 x CAN 2.0B active | — |
| ADC | 3 x 12-bit, up to 2.4 MSPS | — |
| DAC | 2 x 12-bit | — |
| Timers | 17 (including 12 x 16-bit, 2 x 32-bit) | — |
| GPIOs | Up to 82 fast GPIOs | — |
| Crypto/Hash Accelerator | AES-128/192/256, SHA-1, MD5, 3DES | — |
| SDMMC | 1 x SDMMC host | — |
| Communication Peripherals | UART, SPI, I2C, SAI, SPDIF-Rx | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Niveau MSL | 3 (168 hours) | — |
| Maximum Core Frequency | — | 100 MHz |
| Architecture | — | 32-bit MCU with FPU and DSP capability |
| USB Interface | — | USB OTG FS |
| Timer Count | — | 11 timers |
| ADC Count | — | 1 ADC |
| Communication Interface Count | — | 13 communication interfaces |
| Tension d'alimentation | — | [DATA_NEEDED: supply voltage range] |
| Maximum GPIO Count | — | [DATA_NEEDED: GPIO count] |
| PWM Capability | — | [DATA_NEEDED: PWM channel and timer details] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 status] |