STM32F446RCT7 vs STM32F429VGT6 Comparaison
Comparaison détaillée côte à côte de STM32F446RCT7 par STMicroelectronics et STM32F429VGT6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F446RCT7 - 180MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics
STM32F446RCT7 ✓ ActifSTMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ ActifComparaison des spécifications
| Paramètre | STM32F446RCT7 | STM32F429VGT6 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $10,85 |
| Product Type | 32-bit ARM Cortex-M4 microcontroller | — |
| CPU Core | ARM Cortex-M4 | — |
| Architecture | 32-bit RISC | — |
| Maximum CPU Frequency | 180 MHz | — |
| Flash Memory | 256 KB | 1 MB |
| RAM | [DATA_NEEDED: RAM size and memory breakdown] | — |
| Floating-Point Unit | FPU | — |
| DSP Capability | DSP | — |
| Boîtier | 64-LQFP (10 x 10 mm) | LQFP-100 (14 x 14 mm) |
| Package Family | LQFP | — |
| Type de montage | Surface mount | Surface Mount |
| Nombre de broches | 64 pins | — |
| Core Classification | High-performance foundation line | — |
| Series | STM32F4 | — |
| Device Family | STM32F446xC/E | — |
| Operating Voltage | [DATA_NEEDED: operating voltage range] | 1.8 V to 3.6 V |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 C to +85 C (grade 6) |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Programming and Debug Interfaces | [DATA_NEEDED: programming and debug interface list] | — |
| Core | — | ARM Cortex-M4 with FPU and DSP instructions |
| CPU Maximum Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| SRAM | — | 192 KB (including 4 KB backup SRAM) |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| MPU | — | Yes (memory protection unit) |
| LCD-TFT Controller | — | Yes, up to XGA resolution |
| DMA2D (Chrom-ART) | — | Yes |
| USB OTG | — | HS + FS (with on-chip PHY) |
| Ethernet MAC | — | 10/100 with IEEE 1588v2 |
| CAN Controllers | — | 2 x CAN 2.0B active |
| ADC | — | 3 x 12-bit, up to 2.4 MSPS |
| DAC | — | 2 x 12-bit |
| Timers | — | 17 (including 12 x 16-bit, 2 x 32-bit) |
| GPIOs | — | Up to 82 fast GPIOs |
| Crypto/Hash Accelerator | — | AES-128/192/256, SHA-1, MD5, 3DES |
| SDMMC | — | 1 x SDMMC host |
| Communication Peripherals | — | UART, SPI, I2C, SAI, SPDIF-Rx |
| Niveau MSL | — | 3 (168 hours) |