STM32F446VET7 vs STM32F429VGT6 Comparaison
Comparaison détaillée côte à côte de STM32F446VET7 par STMicroelectronics et STM32F429VGT6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F446VET7 - 180MHz Cortex-M4 MCU with 512KB Flash | STMicroelectronics
STM32F446VET7 UnknownSTMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ ActifComparaison des spécifications
| Paramètre | STM32F446VET7 | STM32F429VGT6 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Unknown | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $10,85 |
| Product Type | 32-bit ARM Cortex-M4 microcontroller | — |
| Manufacturer | STMicroelectronics | — |
| Maximum CPU Frequency | 180 MHz | — |
| Core | ARM Cortex-M4 | ARM Cortex-M4 with FPU and DSP instructions |
| Architecture | 32-bit RISC | — |
| Performance | 225 DMIPS | — |
| Flash Memory | 512 KB | 1 MB |
| Flash Organization | 512K x 8 | — |
| DSP Support | Yes | — |
| Floating-Point Unit | Yes | — |
| SPI Interfaces | Dual Quad SPI | — |
| SDRAM Interface | Supported | — |
| Audio Interfaces | Supported | — |
| Boîtier | 100-LQFP 14 x 14 mm | LQFP-100 (14 x 14 mm) |
| Nombre de broches | 100 pins | — |
| Type de montage | Surface mount | Surface Mount |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| RAM | [DATA_NEEDED: RAM capacity] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Statut du cycle de vie | [DATA_NEEDED: current manufacturer lifecycle status] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| CPU Maximum Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| SRAM | — | 192 KB (including 4 KB backup SRAM) |
| Operating Voltage | — | 1.8 V to 3.6 V |
| Température de fonctionnement | — | -40 C to +85 C (grade 6) |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| MPU | — | Yes (memory protection unit) |
| LCD-TFT Controller | — | Yes, up to XGA resolution |
| DMA2D (Chrom-ART) | — | Yes |
| USB OTG | — | HS + FS (with on-chip PHY) |
| Ethernet MAC | — | 10/100 with IEEE 1588v2 |
| CAN Controllers | — | 2 x CAN 2.0B active |
| ADC | — | 3 x 12-bit, up to 2.4 MSPS |
| DAC | — | 2 x 12-bit |
| Timers | — | 17 (including 12 x 16-bit, 2 x 32-bit) |
| GPIOs | — | Up to 82 fast GPIOs |
| Crypto/Hash Accelerator | — | AES-128/192/256, SHA-1, MD5, 3DES |
| SDMMC | — | 1 x SDMMC host |
| Communication Peripherals | — | UART, SPI, I2C, SAI, SPDIF-Rx |
| Statut RoHS | — | Compliant |
| Niveau MSL | — | 3 (168 hours) |