STM32F746IGT6 vs STM32F750N8H6 Comparaison

Comparaison détaillée côte à côte de STM32F746IGT6 par STMicroelectronics et STM32F750N8H6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

STMicroelectronics
STM32F746IGT6 STM32F746IGT6 - Cortex-M7 MCU 1MB Flash 216MHz LQFP-176

STM32F746IGT6 - Cortex-M7 MCU 1MB Flash 216MHz LQFP-176

STM32F746IGT6 ✓ Actif

Comparaison des spécifications

Paramètre STM32F746IGT6 STM32F750N8H6
Marque STMicroelectronics STMicroelectronics
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $13,76 $7,10
Core Architecture ARM Cortex-M7 32-bit RISC Arm Cortex-M7 32-bit RISC
Fréquence d'horloge maximale 216 MHz —
FPU Double-precision IEEE 754 Single-precision + double-precision hardware FPU
L1 Cache 16 KB I-cache + 16 KB D-cache —
Program Memory 1 MB Flash —
SRAM 340 KB total (256 KB SRAM1/SRAM2 + 64 KB CCM SRAM + 16 KB DTCM-RAM + 4 KB backup SRAM) —
Tension d'alimentation 1.8 V / 2.5 V / 3.3 V —
Plage de température de fonctionnement -40 C to +85 C (industrial grade -6 suffix) —
Boîtier 176-pin LQFP (24x24 mm, 0.5 mm pitch) TFBGA-216 (H6)
ADC 3x 12-bit, 2.4 MSPS, 24 channels —
DAC 2x 12-bit 2 x 12-bit
Communication Interfaces USB OTG FS+HS, 10/100 Ethernet MAC, 3x CAN 2.0B, 6x USART/UART, 6x SPI, 3x I2C, 2x SDMMC, 1x CAN, 1x SPDIF-RX —
Display Controller LCD-TFT controller up to XGA resolution with Chrom-ART accelerator —
Camera Interface 8- to 14-bit parallel, up to 54 MB/s Yes (8- to 14-bit parallel)
Crypto Hardware AES-128/192/256, Triple-DES, SHA-1/MD5, TRNG —
Timers 12x 16-bit, 2x 32-bit —
DMA 2x DMA controllers, 16 streams total —
GPIO Up to 140 I/O —
Statut RoHS Compliant Compliant
Maximum CPU Frequency — 216 MHz
DMIPS Performance — 462 DMIPS
Flash Memory — 64 KB
Total SRAM — 340 KB (320 + 16 + 4 KB)
DSP Instructions — Yes (SIMD, MAC)
Operating Voltage — 1.8 V to 3.6 V
Supply Current Max — [DATA_NEEDED: maximum supply current]
Type de montage — Surface Mount
Température de fonctionnement — -40C to +85C
USB Interface — OTG Full-Speed + High-Speed (dedicated PHY)
CAN — 2 x CAN 2.0B
LCD-TFT Controller — Yes (dedicated pixel clock)
ADC Resolution — 12-bit, up to 2.4 MSPS
ART Accelerator — Yes (zero-wait-state Flash execution)
Niveau MSL — [DATA_NEEDED: moisture sensitivity level]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis