STM32F769NIH6 vs STM32F777IIK6 Comparaison
Comparaison détaillée côte à côte de STM32F769NIH6 par STMicroelectronics et STM32F777IIK6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F769NIH6 - 2MB Flash 216MHz ARM Cortex-M7 MCU | STMicroelectronics
STM32F769NIH6 ✓ ActifSTMicroelectronics
STM32F777IIK6 - 216MHz Cortex-M7 MCU 2MB Flash UFBGA-176 | STMicroelectronics
STM32F777IIK6 ✓ ActifComparaison des spécifications
| Paramètre | STM32F769NIH6 | STM32F777IIK6 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $15,85 | $16,12 |
| Core Architecture | ARM Cortex-M7 32-bit RISC | ARM Cortex-M7 with FPU + DSP |
| Maximum CPU Frequency | 216 MHz | — |
| Performance | 462 DMIPS / 2.14 DMIPS/MHz | — |
| FPU | Single-precision IEEE 754 | — |
| DSP Instructions | Yes | — |
| Flash Memory | 2 MB (dual-bank) | — |
| SRAM | 512 KB | — |
| Tension d'alimentation | 1.7 V to 3.6 V | — |
| Température de fonctionnement | -40 C to +85 C (industrial) | — |
| Boîtier | 216-pin TFBGA (13x13 mm) | 176+25 UFBGA (10x10 mm) |
| GPIO Count | 168 | — |
| 12-bit ADC Count | 3 | — |
| 12-bit DAC Count | 2 | — |
| Timer Count | 17 (16-bit and 32-bit) | — |
| USB Interfaces | 2x USB 2.0 OTG (HS + FS) | — |
| Ethernet MAC | 2x 10/100 | — |
| CAN Interfaces | 3 | — |
| SPI / I2C / USART | 6 / 4 / 4 + 4 UART | — |
| SAI / SDMMC | 2 / 1 | — |
| TFT LCD Controller | Yes (up to XGA) | — |
| Chrom-ART Accelerator | Yes (DMA2D) | — |
| Hardware JPEG Codec | Yes | — |
| Cryptography | AES, Hash, TRNG | — |
| Statut RoHS | Compliant | Compliant |
| CPU Frequency | — | 216 MHz max |
| DMIPS Performance | — | 462 DMIPS |
| Instruction Cache | — | 16 KB I-cache, 16 KB D-cache |
| Program Flash | — | 2 MB dual-bank |
| SRAM Total | — | 512 KB + 16 KB + 4 KB backup |
| Operating Voltage | — | 1.7 V to 3.6 V |
| Temperature Range | — | [DATA_NEEDED: industrial operating temperature range] |
| ADC | — | Two 12-bit, up to 2.4 MSPS each |
| DAC | — | Two 12-bit |
| Display Interface | — | TFT-LCD controller + MIPI-DSI |
| USB | — | USB OTG HS + USB OTG FS (with embedded PHY) |
| Ethernet | — | 10/100 MAC (IEEE 1588) |
| CAN | — | Three CAN 2.0B controllers |
| SDMMC | — | Two SDMMC interfaces |
| Quad-SPI | — | Dual-mode Quad-SPI (one) for external Flash/PSRAM |
| External Memory Bus | — | SDRAM, NAND, NOR (8/16/32-bit) |
| Crypto/Hash | — | AES-128/192/256, SHA-1/SHA-256, TRNG |
| Timers | — | Up to 18 (13x 16-bit + 2x 32-bit + low-power + watchdog + SysTick) |
| Type de montage | — | Surface Mount (BGA) |
| Niveau MSL | — | [DATA_NEEDED: MSL moisture sensitivity level] |