STM32G473VCT6 vs STM32F429VGT6 Comparaison
Comparaison détaillée côte à côte de STM32G473VCT6 par STMicroelectronics et STM32F429VGT6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ ActifComparaison des spécifications
| Paramètre | STM32G473VCT6 | STM32F429VGT6 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $10,85 |
| Core | Arm Cortex-M4 32-bit RISC core with FPU | ARM Cortex-M4 with FPU and DSP instructions |
| Maximum Core Frequency | 170 MHz | — |
| Flash Memory | 256 KB | 1 MB |
| SRAM | 128 KB | 192 KB (including 4 KB backup SRAM) |
| Math Accelerator | Present | — |
| Core Performance | Up to 213 DMIPS | — |
| Boîtier | 100-LQFP, 14 x 14 mm | LQFP-100 (14 x 14 mm) |
| Architecture | MCU with integrated analog resources | — |
| Family | STM32G4 | — |
| Orderable Family Variants | STM32G473xB, STM32G473xC, STM32G473xE | — |
| Type de montage | Surface mount | Surface Mount |
| Microcontroller Category | Embedded microcontroller | — |
| Processor Core | Cortex-M4 | — |
| Program Memory Type | Flash | — |
| Analog Capability | Rich analog resources | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| I/O Pin Count | [DATA_NEEDED: I/O pin count] | — |
| CPU Maximum Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| Operating Voltage | — | 1.8 V to 3.6 V |
| Température de fonctionnement | — | -40 C to +85 C (grade 6) |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| MPU | — | Yes (memory protection unit) |
| LCD-TFT Controller | — | Yes, up to XGA resolution |
| DMA2D (Chrom-ART) | — | Yes |
| USB OTG | — | HS + FS (with on-chip PHY) |
| Ethernet MAC | — | 10/100 with IEEE 1588v2 |
| CAN Controllers | — | 2 x CAN 2.0B active |
| ADC | — | 3 x 12-bit, up to 2.4 MSPS |
| DAC | — | 2 x 12-bit |
| Timers | — | 17 (including 12 x 16-bit, 2 x 32-bit) |
| GPIOs | — | Up to 82 fast GPIOs |
| Crypto/Hash Accelerator | — | AES-128/192/256, SHA-1, MD5, 3DES |
| SDMMC | — | 1 x SDMMC host |
| Communication Peripherals | — | UART, SPI, I2C, SAI, SPDIF-Rx |
| Niveau MSL | — | 3 (168 hours) |