STM32L443RCT6 vs STM32L452RET6P Comparaison
Comparaison détaillée côte à côte de STM32L443RCT6 par STMicroelectronics et STM32L452RET6P par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32L443RCT6 - 80MHz Cortex-M4 MCU 256KB Flash | STMicroelectronics
STM32L443RCT6 ✓ ActifSTMicroelectronics
STM32L452RET6P - 80MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics
STM32L452RET6P ✓ ActifComparaison des spécifications
| Paramètre | STM32L443RCT6 | STM32L452RET6P |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,10 | $5,62 |
| Core Architecture | Arm Cortex-M4 with FPU and DSP instructions | Arm Cortex-M4F with FPU and DSP |
| Fréquence d'horloge maximale | 80 MHz | 80 MHz |
| DMIPS Performance | 100 DMIPS | 100 DMIPS |
| Program Memory (Flash) | 256 KB | — |
| SRAM | 64 KB | 160 KB |
| Operating Voltage Range | 1.71 V to 3.6 V | — |
| Boîtier | 64-pin LQFP (TRAY/REEL) | 64-LQFP (10x10 mm) |
| Plage de température de fonctionnement | -40C to +85C | -40 C to +85 C or -40 C to +125 C (grade dependent) |
| USB Interface | USB 2.0 Full-Speed with Type-C PD | USB 2.0 Full-Speed Device with embedded PHY and DFS |
| LCD Driver | Up to 4x44 or 8x40 segments | Yes, up to 8x40 segments |
| ADC | 12-bit, 5 Msps | — |
| DAC | 2x 12-bit | — |
| Operational Amplifiers | 2 on-chip | — |
| Hardware Cryptography | AES-256 hardware accelerator | — |
| Communication Peripherals | USART, LPUART, SPI, I2C, CAN 2.0B, USB FS | — |
| Timers | 16-bit and 32-bit timers, RTC, SysTick, LPTIM | — |
| Statut RoHS | Compliant | Compliant |
| Flash Memory | — | 512 KB |
| Supply Voltage Range | — | 1.71 V to 3.6 V |
| Shutdown Mode Current | — | 22 nA (5 wakeup pins) |
| VBAT Mode Current | — | 145 nA (RTC + 32x32-bit backup registers) |
| Type de montage | — | Surface Mount |
| ADC / DAC | — | 2x 12-bit ADC (5 Msps), 2x 12-bit DAC |
| Analog Peripherals | — | 2 op-amps, 2 comparators |
| Connectivity | — | CAN 2.0B, 2x I2C, 3x SPI, 4x USART, 2x UART, 1x LPUART |
| Hardware Crypto | — | AES-256 |
| External SMPS | — | Yes (integrated SMPS step-down converter) |