STUSB4500QTR vs STUSB4500LBJR Comparaison
Comparaison détaillée côte à côte de STUSB4500QTR par STMicroelectronics et STUSB4500LBJR par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STUSB4500QTR - Standalone USB PD Sink Controller, 100W, 24-QFN | STMicroelectronics
STUSB4500QTR ✓ ActifSTMicroelectronics
STUSB4500LBJR - USB Type-C Sink PD Controller, 25-WLCSP | ST
STUSB4500LBJR ✓ ActifComparaison des spécifications
| Paramètre | STUSB4500QTR | STUSB4500LBJR |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,74 | $2,20 |
| Product Type | Standalone USB Type-C PD Sink Controller | Standalone USB Type-C sink port controller (USB PD 2.0) |
| USB Standard | USB Type-C R2.1, USB Power Delivery R3.0 | — |
| USB Speed | USB 1.2 / USB 2.0 (no USB 3.x data) | — |
| Maximum PD Power | 100 W (20 V / 5 A) | — |
| Supported PDO Voltages | 5 V / 9 V / 12 V / 15 V / 20 V | — |
| Role | Sink (UFP) only | — |
| Host Interface | I2C (Fast-mode 400 kHz) | I2C (config + telemetry) |
| CC Pin VBUS Short Protection | Up to 22 V on CC1, CC2, VCONN- | — |
| Integrated NVM | Yes (PDO profile configuration) | — |
| Dead Battery Support | Yes | — |
| Auto-Run Mode | Yes (MCU-less negotiation) | — |
| VCONN Source | No (sink only, no VCONN supply) | — |
| GPIO Pins | 2 (configurable) | — |
| Boîtier | 24-QFN (4x4 mm) with exposed pad | 25-WLCSP, 2.59 x 2.59 mm |
| Plage de température de fonctionnement | -40 C to +105 C | — |
| Supply Voltage (VBUS to VCC internal LDO) | Up to 22 V tolerance | — |
| Type de montage | Surface Mount | Surface Mount (WLCSP) |
| Niveau MSL | 3 (168 hours) | — |
| Statut RoHS | Compliant | Compliant |
| USB-IF Certification | Yes (TID 1074413) | — |
| Interface | — | USB Type-C, USB 2.0 with I2C control |
| PD Role Supported | — | Sink (L variant, 5 V-only negotiated) |
| Maximum Negotiated Power | — | 100 W (20 V / 5 A) |
| Default Profile | — | 5 V legacy up to 3 A |
| Supply Voltage VDD | — | 3.0 V to 5.5 V |
| VBUS Tolerance | — | [DATA_NEEDED: VBUS max tolerated voltage] |
| Dead Battery Mode | — | Supported |
| Cable Orientation Detection | — | Yes (CC1/CC2) |
| Debug Accessory Detection | — | Yes (advertised on GPIO) |
| OVP / OCP | — | Integrated VBUS OVP and OCP |
| NVM for Profiles | — | Internal NVM, I2C loadable |
| Température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |