TCA9535PWR vs TCA9555PWR Comparaison

Comparaison détaillée côte à côte de TCA9535PWR par Texas Instruments et TCA9555PWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
TCA9535PWR TCA9535PWR - 16-Bit I/O Expander | Texas Instruments

TCA9535PWR - 16-Bit I/O Expander | Texas Instruments

TCA9535PWR ✓ Actif
Texas Instruments
TCA9555PWR TCA9555PWR - 16-bit I2C/SMBus I/O Expander w/ Interrupt | TI

TCA9555PWR - 16-bit I2C/SMBus I/O Expander w/ Interrupt | TI

TCA9555PWR ✓ Actif

Comparaison des spécifications

Paramètre TCA9535PWR TCA9555PWR
Marque Texas Instruments Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type 16-bit I2C/SMBus I/O expander —
Number of I/O Pins 16 pins —
Number of Ports 2 ports of 8 bits —
Tension d'alimentation de fonctionnement 1.65 V to 5.5 V —
Serial Bus I2C and SMBus —
Maximum I2C Bus Frequency 400 kHz —
Interface Pins 2-wire bidirectional bus —
Interrupt Output 1 interrupt output Yes, active-low open-drain INT
Configuration Registers 2 configuration registers Yes (direction, polarity, mask)
Polarity Inversion Registers 2 polarity-inversion registers —
Input Configuration High-impedance input mode —
Configuration de sortie Independently configurable per port bit —
Boîtier 24-pin TSSOP (PW) 24-pin TSSOP (PW)
Type de montage Surface mount Surface Mount
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Courant de repos [DATA_NEEDED: quiescent current] —
Output Current per Pin [DATA_NEEDED: output current per pin] —
I2C Slave Address [DATA_NEEDED: I2C slave address] —
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
Fonction — 16-bit I2C/SMBus I/O expander
Number of I/O — 16
Interface — I2C, SMBus
Fréquence d'horloge maximale — 400 kHz (TI) / 1 MHz (UMW second-source)
I2C Address Pins — 3 (A0, A1, A2) - up to 8 devices per bus
Weak Pull-up Resistors — Programmable per port
Supply Voltage (VCC) — 1.65 V to 5.5 V
Output Current per Bit — -25 mA to +25 mA (sink/source)
I/O Voltage Tolerance — 5 V tolerant
Température de fonctionnement — -40 C to +85 C
Niveau MSL — 1 (260 C, unlimited floor life per JEDEC J-STD-020)
Statut RoHS — Compliant
REACH — Compliant

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis