TCAN330DCNR vs TCAN332DCNR Comparaison

Comparaison détaillée côte à côte de TCAN330DCNR par Texas Instruments et TCAN332DCNR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
TCAN330DCNR TCAN330DCNR - 3.3V 1Mbps CAN Transceiver | Texas Instruments

TCAN330DCNR - 3.3V 1Mbps CAN Transceiver | Texas Instruments

TCAN330DCNR ✓ Actif
Texas Instruments
TCAN332DCNR TCAN332DCNR - 3.3V 1Mbps CAN Transceiver | Texas Instruments

TCAN332DCNR - 3.3V 1Mbps CAN Transceiver | Texas Instruments

TCAN332DCNR ✓ Actif

Comparaison des spécifications

Paramètre TCAN330DCNR TCAN332DCNR
Marque Texas Instruments Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type 1/1 CAN bus transceiver CAN FD transceiver
Supply Voltage Range 3V to 3.6V —
Maximum CAN Data Rate 1Mbps —
Transmitter Count 1 —
Receiver Count 1 —
Low-Power Current 20uA —
Courant d'alimentation 60mA —
Plage de température de fonctionnement -40°C to +125°C -40°C to +125°C
Boîtier 8-pin SOT-23 (DCN) 8-pin SOT-23 (DCN)
Nombre de broches 8 pins —
Type de montage Surface mount Surface mount
Protection Features ESD protection, undervoltage protection, thermal shutdown protection, bus fault protection, short-circuit protection —
Operating Modes Low-power shutdown, standby, silent mode —
TXD Fault Feature TXD dominant timeout —
Type d'interface Controller Area Network (CAN) —
Tension d'alimentation 3.3V 3.0 V to 3.63 V
Statut RoHS Compliant Compliant
Device Marking 330 —
Exact Package Dimensions [DATA_NEEDED: package dimensions] —
CAN Transceiver Loop Delay [DATA_NEEDED: loop delay] —
Receiver Common-Mode Range [DATA_NEEDED: receiver common-mode range] —
Standby Current [DATA_NEEDED: standby current] —
Courant d'arrêt [DATA_NEEDED: shutdown current] —
ESD HBM withstand Voltage [DATA_NEEDED: ESD HBM withstand voltage] —
IEC ESD withstand Voltage [DATA_NEEDED: IEC ESD withstand voltage] —
Nominal Supply Voltage — 3.3 V
Maximum Data Rate — 1 Mbps
Supported Protocols — CAN and CAN FD
Number of Channels — 1 channel
Receiver Common-Mode Input Range — -2 V to 7 V
Nombre de broches — 8 pins
Power-Down and Standby Modes — Supported
Niveau MSL — MSL 1 at 260°C
MSL Duration — Unlimited
REACH Status — [DATA_NEEDED: REACH status]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification status]
Transceiver Delay — [DATA_NEEDED: maximum loop delay]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis