TJA1052IT-1Y vs ISO1042DW Comparaison

Comparaison détaillée côte à côte de TJA1052IT-1Y par NXP Semiconductors et ISO1042DW par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
TJA1052IT-1Y TJA1052IT-1Y - Galvanically Isolated HS CAN Transceiver | NXP

TJA1052IT-1Y - Galvanically Isolated HS CAN Transceiver | NXP

TJA1052IT-1Y ✓ Actif

Comparaison des spécifications

Paramètre TJA1052IT-1Y ISO1042DW
Marque NXP Semiconductors Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Fonction Galvanically isolated high-speed CAN transceiver —
Data Rate (max) 1 Mbit/s —
Standards Compliance ISO 11898-2, ISO 11898-5 —
Number of Channels 2 (TXD / RXD across isolation) —
Isolation Voltage 1 kV (channel rating) —
Supply Voltage - Logic Side [DATA_NEEDED: VCC1 supply range] —
Supply Voltage - Bus Side [DATA_NEEDED: VCC2 supply range] —
Température de fonctionnement -40 C to +125 C (automotive) —
Boîtier / Format 16-SOIC (SOT-109 / SO-16) —
Type de montage Surface Mount Surface mount
Target Application Electric Vehicle (EV), Hybrid Electric Vehicle (HEV) —
Protocol CAN 2.0A, CAN 2.0B —
Duplex Half —
Receiver Hysteresis Yes (per ISO 11898-2/-5) —
Bus Fault Protection -27 V to +40 V on CANH/CANL (typical for the family) —
Statut RoHS Compliant —
Lead Free Yes —
Niveau MSL [DATA_NEEDED: MSL rating] —
Product Type — Galvanically isolated CAN FD transceiver
Maximum CAN FD Data Rate — 5 Mbps
Classic CAN Data Rate — 1 Mbps
CAN Physical-Layer Standard — ISO 11898-2:2016
DC Bus Fault Protection — ±70 V DC
Common-Mode Voltage Range — ±30 V
Loop Delay — 152 ns
Supply Voltage Range — 1.8 V to 5.5 V
Isolation Type — Reinforced galvanic isolation
Boîtier — 16-pin wide-body SOIC (DW)
Plage de température de fonctionnement — -40 °C to +125 °C
Bus-Side ESD Tolerance — HBM ESD protection; rating [DATA_NEEDED: HBM ESD voltage]
Transceiver Count — 1 transceiver
Logic-Side Supply — 1.8 V to 5.5 V
RoHS Compliance — [DATA_NEEDED: RoHS status]
REACH Compliance — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis