TJA1052IT vs ISO1042QDWRQ1 Comparaison
Comparaison détaillée côte à côte de TJA1052IT par NXP Semiconductors et ISO1042QDWRQ1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TJA1052IT | ISO1042QDWRQ1 |
|---|---|---|
| Marque | NXP Semiconductors | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Galvanically Isolated High-Speed CAN Transceiver | — |
| Débit de données | Up to 1 Mbit/s | — |
| Protocol | ISO 11898-2 (High-Speed CAN) | — |
| Number of Drivers/Receivers | 1/1 | — |
| Isolation Type | Galvanic (integrated, reinforced) | Galvanic isolation |
| Supply Voltage - VCC (logic side) | 3 V to 5.25 V | — |
| Supply Voltage - VBUS (bus side) | 4.75 V to 7 V [DATA_NEEDED: exact VBUS range from datasheet] | — |
| Température de fonctionnement | -40 C to +125 C | — |
| Boîtier / Format | 16-SOIC (SO-16, narrow body) | — |
| Type de montage | Surface Mount | Surface mount |
| Common-Mode Transient Immunity | [DATA_NEEDED: CMTI value from datasheet] | — |
| ESD Protection | [DATA_NEEDED: HBM/CDM ESD rating] | — |
| Loop Delay (typical) | [DATA_NEEDED: typical TX-to-RX loop delay] | — |
| Target Application | EV / HEV automotive high-voltage CAN | — |
| Statut RoHS | Compliant | — |
| AEC-Q100 | Qualified (automotive grade) | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Product Type | — | Galvanically isolated CAN transceiver |
| CAN Standard | — | ISO11898-2 (2016) |
| Maximum Data Rate | — | 5 Mbps |
| CAN FD Support | — | Up to 5 Mbps |
| DC Bus Fault Protection | — | ±70 V |
| Common-Mode Voltage Range | — | ±30 V |
| Application Classification | — | Automotive |
| Boîtier | — | 16-pin SOIC |
| Package Width | — | 7.50 mm |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Controller-Side Supply Current | — | [DATA_NEEDED: controller-side supply current] |
| Isolation Working Voltage | — | [DATA_NEEDED: isolation working voltage] |
| Transient Isolation Voltage | — | [DATA_NEEDED: transient isolation voltage] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |