TJA1057T vs TJA1059TK Comparaison
Comparaison détaillée côte à côte de TJA1057T par NXP Semiconductors et TJA1059TK par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TJA1057T | TJA1059TK |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | NRND | Actif |
| Product Type | High-speed CAN transceiver | — |
| Débit de données | 1 Mbit/s for TJA1057T | Up to 1 Mbit/s (HS-CAN) |
| CAN FD Fast-Phase Support | Up to 5 Mbit/s for other TJA1057 variants | — |
| Bus Interface | Two-wire differential CAN bus | — |
| Logic Interface | CAN protocol controller | — |
| CAN Physical-Layer Standard | ISO 11898-2:2016 | — |
| Automotive Timing Standards | SAE J2284-1 to SAE J2284-5 | — |
| Product Family | Mantis | — |
| Boîtier | 8-pin SO package | 14-pin HVSON (3x4.5 mm) |
| Type de montage | Through-hole | Surface Mount, exposed thermal pad |
| Statut du cycle de vie | NRND | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Transmitter Differential Output | [DATA_NEEDED: transmitter differential output characteristics] | — |
| Receiver Output Levels | [DATA_NEEDED: receiver output voltage levels] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Bus Termination Resistance | [DATA_NEEDED: recommended bus termination resistance] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Fonction | — | Dual high-speed CAN transceiver |
| Number of Channels | — | 2 (independent HS-CAN transceivers) |
| Standards Compliance | — | ISO 11898-2:2024 (physical layer) |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Quiescent Current (Standby) | — | [DATA_NEEDED: standby Iq per channel] |
| Température de fonctionnement | — | -40 C to +125 C |
| Bus Fault Protection | — | +/- 8 kV HBM ESD on CANH/CANL |
| Transmit Dominant Timeout | — | Built-in (prevents DC blocking of bus) |
| Standby Mode | — | Yes (via STB pin, both channels enter low-Iq state) |
| Niveau MSL | — | 1 per JEDEC J-STD-020 |
| Automotive Qualification | — | AEC-Q100 Grade 0 capable |
| Lead-Free / Halogen-Free | — | Yes / Yes |
| Compliance | — | RoHS compliant, REACH compliant |