TL072CP vs LM358PWR Comparaison
Comparaison détaillée côte à côte de TL072CP par Texas Instruments et LM358PWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ ActifComparaison des spécifications
| Paramètre | TL072CP | LM358PWR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Manufacturer | Texas Instruments | — |
| Part Status | Active | — |
| Amplifier Type | JFET-Input Operational Amplifier | General Purpose / Standard |
| Number of Circuits | 2 (Dual) | — |
| Slew Rate | 13 V/µs (typical) | 0.3 V/us |
| Gain Bandwidth Product | 3 MHz (typical) | — |
| Input Bias Current | 30 pA (typical) | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | 3 mV (typical, C grade) | [DATA_NEEDED: input offset voltage] |
| Input Noise Voltage Density | 18 nV/√Hz (typical at 1 kHz) | — |
| Total Harmonic Distortion | 0.003% (typical) | — |
| Supply Voltage Range (Dual) | ±3.5 V to ±18 V | ±1.5 V to ±16 V |
| Supply Voltage Range (Single) | 7 V to 36 V | 3 V to 32 V |
| Plage de température de fonctionnement | 0°C to +70°C (C grade) | [DATA_NEEDED: operating temperature range] |
| Boîtier / Format | 8-PDIP (Plastic DIP, through-hole) | — |
| Type de montage | Through Hole | Surface Mount |
| Nombre de broches | 8 | 8 |
| Output Short-Circuit Protection | Yes | — |
| Internal Frequency Compensation | Yes | — |
| Latch-up Free Operation | Yes | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Number of Amplifiers | — | 2 |
| Gain-Bandwidth Product | — | 700 kHz |
| Supply Current (per amplifier) | — | [DATA_NEEDED: supply current] |
| Common-Mode Input Range | — | Extends to ground (single-supply capable) |
| Differential Input Voltage Capability | — | High differential input voltage (per TI product page) |
| Boîtier | — | TSSOP-8 (PW) |
| Next-Generation Upgrade | — | LM358B (36 V, pin-to-pin upgrade with improved performance) |