TL072CP vs NE5532APSR Comparaison
Comparaison détaillée côte à côte de TL072CP par Texas Instruments et NE5532APSR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ ActifComparaison des spécifications
| Paramètre | TL072CP | NE5532APSR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Manufacturer | Texas Instruments | — |
| Part Status | Active | — |
| Amplifier Type | JFET-Input Operational Amplifier | — |
| Number of Circuits | 2 (Dual) | — |
| Slew Rate | 13 V/µs (typical) | 9 V/µs typical |
| Gain Bandwidth Product | 3 MHz (typical) | — |
| Input Bias Current | 30 pA (typical) | 1 µA typical |
| Input Offset Voltage | 3 mV (typical, C grade) | — |
| Input Noise Voltage Density | 18 nV/√Hz (typical at 1 kHz) | — |
| Total Harmonic Distortion | 0.003% (typical) | — |
| Supply Voltage Range (Dual) | ±3.5 V to ±18 V | — |
| Supply Voltage Range (Single) | 7 V to 36 V | — |
| Plage de température de fonctionnement | 0°C to +70°C (C grade) | 0°C to 70°C |
| Boîtier / Format | 8-PDIP (Plastic DIP, through-hole) | — |
| Type de montage | Through Hole | — |
| Nombre de broches | 8 | — |
| Output Short-Circuit Protection | Yes | Included |
| Internal Frequency Compensation | Yes | — |
| Latch-up Free Operation | Yes | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Number of Amplifiers | — | 2 circuits |
| Supply Voltage Range | — | ±5 V to ±15 V |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Package Type | — | 8-pin SOIC |
| Nombre de broches | — | 8 pins |
| Compensation | — | Internally compensated for unity-gain operation |
| Input Protection Diodes | — | Included |
| Output Drive Capability | — | High |
| Maximum-Output-Swing Bandwidth | — | High |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |