TLD60992ESXUMA1 vs TLD23313EPXUMA1 Comparaison
Comparaison détaillée côte à côte de TLD60992ESXUMA1 par Infineon et TLD23313EPXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
TLD23313EPXUMA1 - 60mA Triple High-Side LED Driver | Infineon LITIX
TLD23313EPXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | TLD60992ESXUMA1 | TLD23313EPXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | LED Drivers | LED Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,55 | $0,68 |
| Topologie | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) - configurable | High-side constant-current LED driver |
| Nombre de sorties | 2 (dual channel) | — |
| Plage de tension d'entrée | 4.5 V to 58 V | — |
| Plage de tension de sortie | 2.55 V to 70 V | — |
| Fréquence de commutation | 2.2 MHz (typ) | — |
| Dimming Control | Analog and PWM dimming | — |
| LED Driver Type | Non-isolated, DC-DC controller (external MOSFET) | — |
| Boîtier | PG-TSDSO-24-5 (TSSOP-24 with exposed pad) | PG-TSDSO-14 (exposed pad) |
| Operating Temperature Min | -40 C | — |
| Operating Temperature Max | [DATA_NEEDED: max operating temperature] | — |
| AEC-Q100 Qualification | Yes (automotive grade) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL rating] | 3 |
| Statut RoHS | Compliant | RoHS3 Compliant |
| Internal MOSFET | No (controller, drives external MOSFET) | — |
| Protection Features | Over-voltage, over-current, open-LED, thermal shutdown (per datasheet) | Thermal shutdown, short-circuit, open-load detection |
| Series | LITIX | — |
| Product Family | — | LITIX Basic+ |
| Number of Channels | — | 3 |
| Maximum Output Current per Channel | — | 80 mA |
| Nominal Output Current | — | 60 mA |
| Supply Voltage Range | — | 5.5 V to 40 V |
| Dimming Method | — | PWM (external input pin) |
| Current Setting | — | External resistor on IS pin |
| Plage de température de fonctionnement | — | -40 C to +150 C (junction) |
| Load-Dump Tolerance | — | Compliant for 12 V automotive board-net |