TLD60992ESXUMA1 vs TLE82422LXUMA2 Comparaison
Comparaison détaillée côte à côte de TLD60992ESXUMA1 par Infineon et TLE82422LXUMA2 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
TLE82422LXUMA2 - 8-Ch Low-Side Constant Current Pre-Driver | Infineon
TLE82422LXUMA2 ✓ ActifComparaison des spécifications
| Paramètre | TLD60992ESXUMA1 | TLE82422LXUMA2 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | LED Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,55 | $7,40 |
| Topologie | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) - configurable | — |
| Nombre de sorties | 2 (dual channel) | — |
| Plage de tension d'entrée | 4.5 V to 58 V | — |
| Plage de tension de sortie | 2.55 V to 70 V | — |
| Fréquence de commutation | 2.2 MHz (typ) | — |
| Dimming Control | Analog and PWM dimming | — |
| LED Driver Type | Non-isolated, DC-DC controller (external MOSFET) | — |
| Boîtier | PG-TSDSO-24-5 (TSSOP-24 with exposed pad) | PG-LQFP-64-4 (64-pin LQFP with exposed pad) |
| Operating Temperature Min | -40 C | — |
| Operating Temperature Max | [DATA_NEEDED: max operating temperature] | — |
| AEC-Q100 Qualification | Yes (automotive grade) | Automotive qualified |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL rating] | 3 (per JEDEC J-STD-020) |
| Statut RoHS | Compliant | Compliant |
| Internal MOSFET | No (controller, drives external MOSFET) | — |
| Protection Features | Over-voltage, over-current, open-LED, thermal shutdown (per datasheet) | — |
| Series | LITIX | — |
| Fonction | — | 8-channel low-side constant-current pre-driver |
| Number of Channels | — | 8 |
| Supply Voltage Range (VS) | — | 5.5 V to 42 V |
| Logic Supply (VCC) | — | 5 V (internal regulator) |
| Operating Mode | — | Direct PWM or constant-current (SPI-configurable per channel) |
| Control Interface | — | SPI (16-bit messages) |
| PWM Mode | — | Fixed frequency per channel |
| Configuration de sortie | — | Low-side (drives external N-MOSFET gates) |
| Current Sensing | — | External shunt resistor |
| Diagnostics | — | Open load, short circuit, overtemperature (per channel) |
| Plage de température de fonctionnement | — | -40 °C to +150 °C (junction) |