TLE9104SHXUMA1 vs BTT60302ERAXUMA1 Comparaison
Comparaison détaillée côte à côte de TLE9104SHXUMA1 par Infineon et BTT60302ERAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TLE9104SHXUMA1 | BTT60302ERAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,72 | $2,18 |
| Product Type | Multi-Channel Low-Side Power Switch | Dual-channel Smart High-Side Power Switch |
| Number of Channels | 4 | 2 |
| Load Current per Channel | 3 A (continuous) | — |
| Topologie | 1:1 N-Channel Low-Side Switch | — |
| Supply Voltage Range (VDD) | 4.5 V to 28 V | — |
| Logic Reference (VIO) | 3.3 V / 5 V compatible | — |
| Communication Interface | 16-bit SPI | — |
| R_DS(on) per Channel | [DATA_NEEDED: typical R_DS(on) in mohm] | — |
| Température de fonctionnement | -40 °C to +150 °C (junction) | -40 °C to +150 °C junction |
| Boîtier | PG-DSO-20-88 (20-pin BFSOP with exposed pad) | PG-TDSO-14-31 (14-pin, exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Protection Features | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection |
| Diagnostic Output | SPI status registers (per-channel fault flags) | Current sense (IS pin) |
| Automotive Qualification | AEC-Q100 qualified (automotive grade) | AEC-Q100 |
| Niveau MSL | MSL3 (per JEDEC J-STD-020) | — |
| RoHS / Lead-Free | RoHS compliant, lead-free | — |
| Reset Pin (RESN) | Active-low with configurable reset duration | — |
| Family | — | PROFET+ 24V |
| On-State Resistance (typ, per channel, 25°C) | — | 32 mΩ |
| Continuous Load Current (per channel) | — | 4 A |
| Operating Supply Voltage (Vbb) | — | 8 V to 36 V |
| Load-Dump Tolerance | — | 42 V |
| Switch Type | — | 1:1 N-Channel high-side |
| Process Technology | — | Smart6 (vertical N-MOSFET + charge pump) |
| Standby Current | — | [DATA_NEEDED: standby current] |
| Statut RoHS | — | Compliant |