TLE9180D32QKXUMA1 vs TLE75602ESHXUMA1 Comparaison
Comparaison détaillée côte à côte de TLE9180D32QKXUMA1 par Infineon et TLE75602ESHXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TLE9180D32QKXUMA1 | TLE75602ESHXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,71 | $2,95 |
| Number of Channels | 6 (3 high-side + 3 low-side) | 8 |
| Driver Configuration | Half-Bridge, 3-phase | — |
| Supply Voltage Range (VS) | 5.5 V to 72 V | — |
| Maximum Pin Voltage | 90 V (bridge, motor and supply pins) | — |
| Gate Drive Current | 1 A source/sink | — |
| Battery Support | 12 V, 24 V and 48 V systems | — |
| Interface | SPI (16-bit) with diagnostics | 16-bit SPI |
| Current Sense Amplifier | Integrated, adjustable gain | — |
| Functional Safety | ASIL-C capable (per ISO 26262) | — |
| Température de fonctionnement | -40 C to +150 C junction | -40 C to +150 C (junction, AEC-Q100 automotive grade) |
| Boîtier | PG-LQFP-64-27 (LQFP-64 EP) | PG-TSDSO-24-21 (exposed pad) |
| Package Dimensions | 10 mm x 10 mm x 1.4 mm | — |
| Type de montage | Surface Mount | Surface Mount |
| AEC-Q100 | Qualified | — |
| RoHS | Compliant | — |
| Product Type | — | 8-channel SPI power switch (low-side / high-side) |
| Per-channel Output Current | — | 330 mA |
| Switch Configuration | — | 1:8 N-Channel |
| Operating Voltage Range | — | 4.5 V to 28 V (supports 3.0 V cranking) |
| PWM Generation | — | Configurable per channel, on-chip |
| Rds(on) per channel | — | [DATA_NEEDED: typical Rds(on) per channel] |
| AEC-Q100 Qualified | — | Yes |
| Diagnostic Features | — | Open-load detect, short-to-battery, short-to-ground, overtemperature, current sense |
| Reverse Battery Protection | — | Via external resistor |
| Load Dump Protection | — | Yes |
| Statut RoHS | — | Compliant |