TLIN1124A-Q1 vs TLIN2024A-Q1 Comparaison
Comparaison détaillée côte à côte de TLIN1124A-Q1 par Texas Instruments et TLIN2024A-Q1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TLIN1124A-Q1 - Automotive Quad LIN Transceiver | Texas Instruments
TLIN1124A-Q1 ✓ ActifComparaison des spécifications
| Paramètre | TLIN1124A-Q1 | TLIN2024A-Q1 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,55 | $1,81 |
| Fonction | Quad Local Interconnect Network (LIN) transceiver | — |
| Protocol Standards | LIN 2.0 / 2.1 / 2.2 / 2.2A; ISO/DIS 17987-4; SAE J2602-1 | — |
| Number of Channels | 4 (quad) | 4 (two independent dual blocks) |
| Supply Voltage Range | 5 V to 28 V (12V battery application) | — |
| LIN Bus Fault Tolerance | ±40 V extended | — |
| Maximum LIN Data Rate (LIN spec) | 20 kbps | — |
| Maximum Receiver Data Rate | 100 kbps (high-speed download) | — |
| Plage de température de fonctionnement | -40 C to +125 C | -40 C to +125 C |
| Boîtier | VQFN-24 (RGY) 5.5x3.5 mm | VQFN-20 (RGY) 4.5 mm x 3.5 mm |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 Grade 1 | — |
| Integrated Commander Pull-up | Yes (diode + resistor) | — |
| Inhibit (INH) Pin | Yes | — |
| Local Wake-up | Yes | — |
| ESD Protection (HBM, LIN bus pin) | [DATA_NEEDED: HBM ESD voltage] | — |
| ESD Protection (CDM) | [DATA_NEEDED: CDM ESD voltage] | — |
| Arrêt thermique | Yes (integrated) | — |
| Bus Dominant Time-out | Yes (integrated) | — |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Statut RoHS | Compliant | Compliant |
| Lead-free / Halogen-free | Yes / [DATA_NEEDED: halogen-free status] | — |
| Product Type | — | LIN Physical Layer Transceiver |
| Supply Voltage (VSUP1/2) | — | 4.5 V to 36 V |
| LIN Bus Fault Protection | — | ±58 V (load-dump tolerant) |
| LIN Data Rate | — | Up to 100 kbps (in-line programming) |
| Standard LIN Data Rate | — | Up to 20 kbps (LIN 2.x) |
| AEC-Q100 Grade | — | Grade 1 |
| LIN Standards | — | LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A |
| ISO Compliance | — | ISO/DIS 17987-4 (EPL) |
| SAE Compliance | — | SAE J2602-1 |
| Wake-Up Feature | — | Yes (pattern recognition on LIN bus) |
| Dominant State Timeout | — | Yes |
| Slave Termination Resistor | — | Selectable via SLIN_EN pin |
| RXD Output | — | Open-drain, 3.3 V and 5 V logic compatible |