TLV2450CP vs TLV2450IP Comparaison
Comparaison détaillée côte à côte de TLV2450CP par Texas Instruments et TLV2450IP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TLV2450CP | TLV2450IP |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Single operational amplifier | Single general-purpose operational amplifier |
| Number of Circuits | 1 circuit | — |
| Supply Voltage Range | 2.7 V to 6 V | — |
| Maximum Supply Voltage | 6 V | 6 V |
| Gain-Bandwidth Product | 220 kHz | 220 kHz |
| Typical Quiescent Current | 23 uA | — |
| Input Offset Voltage | 500 uA | ±10 mV |
| Output Current per Channel | 10 mA | — |
| Common-Mode Input | Rail-to-rail | — |
| Output Swing | Rail-to-rail | — |
| Shutdown Function | Yes | — |
| Nombre de broches | 8 pins | — |
| Boîtier | PDIP-8 (P) | 8-pin PDIP |
| Body Width | 0.300 in (7.62 mm) | — |
| Plage de température de fonctionnement | 0 C to 70 C | [DATA_NEEDED: operating temperature range] |
| Type de montage | Through-hole | Through-hole |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Channels | — | 1 channel |
| Courant d'alimentation | — | 23 µA per channel |
| Input Type | — | Rail-to-rail input |
| Type de sortie | — | Rail-to-rail output |
| Shutdown Support | — | Yes |
| Output Drive Capability | — | ±10 mA |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Minimum Supply Voltage | — | [DATA_NEEDED: minimum supply voltage] |