TLV9301IDBVR vs TS321ILT Comparaison
Comparaison détaillée côte à côte de TLV9301IDBVR par Texas Instruments et TS321ILT par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TLV9301IDBVR - 40V 1MHz RRO Op Amp SOT-23-5 | Texas Instruments
TLV9301IDBVR ✓ ActifComparaison des spécifications
| Paramètre | TLV9301IDBVR | TS321ILT |
|---|---|---|
| Marque | Texas Instruments | STMicroelectronics |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Channels | 1 (Single) | — |
| Topologie | Standard (General Purpose) Op Amp | — |
| Type de sortie | Rail-to-Rail Output (RRO) | — |
| Input Type | CMOS (MUX-friendly, rail-to-rail on positive rail) | — |
| Gain Bandwidth Product (GBW) | 1 MHz | — |
| Slew Rate | [DATA_NEEDED: slew rate V/us] | 0.4 V/µs |
| Input Offset Voltage (Vos) | ±0.5 mV (typ) | — |
| Input Offset Drift (dVos/dT) | ±2 µV/°C (typ) | — |
| Supply Voltage Range (Single Supply) | 2.7 V to 40 V | — |
| Supply Voltage Range (Split Supply) | ±1.35 V to ±20 V | — |
| Quiescent Current per Channel (Iq) | [DATA_NEEDED: Iq per channel µA/mA] | — |
| Output Current (Short-Circuit) | ±60 mA (typ short-circuit) | — |
| Common-Mode Rejection Ratio (CMRR) | [DATA_NEEDED: CMRR dB] | — |
| Power-Supply Rejection Ratio (PSRR) | [DATA_NEEDED: PSRR dB] | — |
| Plage de température de fonctionnement | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Boîtier | SOT-23-5 (DBV) | SOT-23-5 |
| Type de montage | Surface Mount | Surface mount |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Automotive Grade (AEC-Q100) | Standard grade (AEC-Q100 variants exist in family) | — |
| Amplifier Type | — | Single operational amplifier |
| Number of Circuits | — | 1 circuit |
| Gain-Bandwidth Product | — | 800 kHz |
| Supply Voltage Range | — | 3 V to 30 V |
| Plage de tension de sortie | — | -1.5 V to +1.5 V |
| Architecture | — | Bipolar |
| Application Category | — | General-purpose amplifier |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |