TMS320C203PZA57 vs TMS320C203PZ57 Comparaison

Comparaison détaillée côte à côte de TMS320C203PZA57 par Texas Instruments et TMS320C203PZ57 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
TMS320C203PZA57 TMS320C203PZA57 - 57MHz 16-Bit Fixed-Point DSP | Texas Instruments

TMS320C203PZA57 - 57MHz 16-Bit Fixed-Point DSP | Texas Instruments

TMS320C203PZA57 ✓ Actif
Texas Instruments
TMS320C203PZ57 TMS320C203PZ57 - 57 MHz 16-Bit Fixed-Point DSP | TI

TMS320C203PZ57 - 57 MHz 16-Bit Fixed-Point DSP | TI

TMS320C203PZ57 ✓ Actif

Comparaison des spécifications

Paramètre TMS320C203PZA57 TMS320C203PZ57
Marque Texas Instruments Texas Instruments
Catégorie DSP DSP
Statut du cycle de vie Actif Actif
Processor Type C20x fixed-point digital signal processor —
Fréquence d'horloge maximale 57.14 MHz —
Performance 28.5 MIPS —
Word Length 16 bit —
Multiplier 16-bit single-cycle multiplier with 32-bit product —
Arithmetic Logic Unit 32-bit ALU and accumulator —
Internal Buses 6 —
On-Chip RAM 544 RAM words —
Process Technology Fully static CMOS Fully static CMOS
IDLE Mode Current 1.1 mA/MIPS at 3.3 V —
Performance at 5 V Up to 40 MIPS Up to 40 MIPS
Performance at 3.3 V Up to 20 MIPS 20 MIPS
Operating Modes IDLE and HOLD —
Emulation IEEE-1149.1-compatible scan-based emulation —
Boîtier 100-pin LQFP (PZ), 14 mm x 14 mm 100-pin LQFP, 14 x 14 mm
Terminal Count 100 —
Plage de température de fonctionnement -40°C to +85°C —
Type de montage Surface mount Surface mount
Pin Compatibility Pin-compatible with TMS320F206 Flash DSP —
Programming Interface [DATA_NEEDED: programming interface details] —
External Memory Interface [DATA_NEEDED: external memory interface] —
Statut RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Device Type — C20x fixed-point digital signal processor
CPU Architecture — 16-bit fixed-point
Clock Frequency — 57 MHz
Power Consumption per MIPS at 3.3 V — 1.1 mA/MIPS
ALU and Accumulator Width — 32 bit
Multiplier Width — 16 x 16 bit
Multiplier Product Width — 32 bit
Internal Bus Count — 6
Power-Down Mode — Supported
IDLE Mode — Supported
HOLD Mode — Supported
Boundary-Scan Interface — IEEE 1149.1-compatible scan-based emulation
Operating Voltage — [DATA_NEEDED: operating voltage range]
Température de fonctionnement — [DATA_NEEDED: operating temperature range]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis