TPS2371PWR vs TPS2371PW Comparaison
Comparaison détaillée côte à côte de TPS2371PWR par Texas Instruments et TPS2371PW par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TPS2371PWR | TPS2371PW |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | NRND | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $1,12 |
| Product Type | Power interface switch for Power over Ethernet powered devices | PoE PD Power Interface Switch |
| PoE Compatibility | Legacy IEEE 802.3af compatible | — |
| Boîtier | 8-TSSOP, 0.173 inch / 4.40 mm width | 8-pin TSSOP (PW) |
| Nombre de broches | 8 pins | — |
| Input Inrush Limit | 400 mA for 50 ms according to IEEE 802.3af specification | — |
| Maximum Load Capacitor Under IEEE 802.3af Limit | Approximately 180 µF | — |
| Inrush Current Control | Programmable | Externally programmable |
| Plage de température de fonctionnement | 0°C to 70°C | -40 °C to +85 °C |
| Type de montage | Surface mount | Surface Mount |
| Manufacturer | Texas Instruments | — |
| Lifecycle Classification | Legacy | — |
| Application Category | Power over Ethernet powered devices | — |
| Type d'interface | PoE power interface | — |
| Plage de tension d'entrée | [DATA_NEEDED: input voltage range] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Continuous Power Rating | [DATA_NEEDED: continuous power rating] | — |
| Current Limit Range | [DATA_NEEDED: programmable current limit range] | — |
| Startup Time | [DATA_NEEDED: startup time] | — |
| Protection Features | [DATA_NEEDED: protection features] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant (per TI product page) |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Standard | — | IEEE 802.3af (legacy compatible) |
| Input Voltage (VDD) | — | 0 V to 100 V (absolute max) |
| Continuous FET Current | — | 0.5 A |
| Peak FET Current | — | 1.5 A |
| Internal FET Rds(on) | — | 1 Ω (typical) |
| Classification Support | — | Class 0-4 (current and voltage mode) |
| Classification Disable Voltage | — | Above 20 V (automatic) |
| Detection Signature | — | 25 kΩ presentation |
| FET Topology | — | Low-side (return-side) N-channel |
| Niveau MSL | — | 2 (per JEDEC J-STD-020, lifetime floor-life 1 year) |
| Arrêt thermique | — | Yes (internal) |
| Undervoltage Lockout | — | Yes (internal) |