TXS0108EPWR vs LSF0108QPWRQ1 Comparaison

Comparaison détaillée côte à côte de TXS0108EPWR par Texas Instruments et LSF0108QPWRQ1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
TXS0108EPWR TXS0108EPWR - 8-Bit Bidirectional Level Shifter 60Mbps | TI

TXS0108EPWR - 8-Bit Bidirectional Level Shifter 60Mbps | TI

TXS0108EPWR ✓ Actif
Texas Instruments
LSF0108QPWRQ1 LSF0108QPWRQ1 - Auto 8-Ch Bidirectional Level Shifter | TI

LSF0108QPWRQ1 - Auto 8-Ch Bidirectional Level Shifter | TI

LSF0108QPWRQ1 ✓ Actif

Comparaison des spécifications

Paramètre TXS0108EPWR LSF0108QPWRQ1
Marque Texas Instruments Texas Instruments
Catégorie Logic ICs Interface ICs
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $0,51 $0,42
Fonction 8-bit bidirectional voltage-level translator —
Translator Type Voltage Level Translator, Bidirectional, 1 Circuit, 8 Channel Voltage Level Translator
Signal Type Open-drain and push-pull —
VCCA Supply Range (A Port) 1.2 V to 3.6 V —
VCCB Supply Range (B Port) 1.65 V to 5.5 V —
Max Data Rate (Push-Pull) 60 Mbps —
Max Data Rate (Open-Drain) 2 Mbps —
Propagation Delay 4.8 ns —
Courant de repos 620 uA —
Direction Control Automatic direction sensing None (automatic bidirectional)
VCC Isolation Yes - outputs high impedance if either VCC at GND —
Température de fonctionnement -40C to +85C -40C to +125C
Boîtier TSSOP (PW), 20 pins 20-TSSOP (PW)
Type de montage Surface Mount Surface Mount
Niveau MSL 1 (260C unlimited floor life) —
Statut RoHS Compliant Compliant
OE Pin Yes - output enable, three-state outputs —
Canaux — 8 bidirectional
Circuits — 1
Voltage - VCCA (VREF_A) — 0.95 V to 4.5 V
Voltage - VCCB (VREF_B) — 1.65 V to 5.5 V
Translation Range — 0.95 V to 5 V
Type de sortie — Open-drain and push-pull compatible
Up Translation Speed — 100 MHz (<=30 pF load)
Down Translation Speed — >100 MHz (<=30 pF load)
Speed at 50 pF Load — 40 MHz up/down
Qualification — AEC-Q100 automotive
Caractéristiques — Rise/fall time control via external pull-ups

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis