TXS0108EQPWRQ1 vs TXB0108PWR Comparaison
Comparaison détaillée côte à côte de TXS0108EQPWRQ1 par Texas Instruments et TXB0108PWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TXS0108EQPWRQ1 | TXB0108PWR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Logic ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,39 | $0,26 |
| Bits / Channels | 8 bidirectional channels | — |
| Translator Type | Auto-direction voltage level translator (open-drain and push-pull) | Bidirectional voltage-level translator, auto-direction sensing |
| VCCA Supply Range | 1.2 V to 3.6 V | — |
| VCCB Supply Range | 1.65 V to 5.5 V | — |
| Max Data Rate (Push-Pull) | 110 Mbps | — |
| Max Data Rate (Open-Drain) | 2 Mbps | — |
| Direction Control | Not required (auto-direction sensing) | — |
| Type de sortie | 3-state with OE pin | Push-pull, 3-state |
| Boîtier | TSSOP-20 (PW) | TSSOP-20 (PW) |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40C to +125C (AEC-Q100 grade 1) | -40C to +85C |
| Automotive Qualification | AEC-Q100 qualified | — |
| ESD HBM Classification | Level 2 | — |
| ESD CDM Classification | Level C6 | — |
| Statut RoHS | Compliant | Compliant |
| Courant de repos | [DATA_NEEDED: Icc typical] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Bits per Channel | — | 8 |
| Canaux | — | 8 |
| A Port Voltage Range | — | 1.2 V to 3.6 V |
| B Port Voltage Range | — | 1.65 V to 5.5 V |
| Max Data Rate | — | 100 Mbps |
| ESD Protection | — | +/-15 kV (HBM) |
| VCC Isolation | — | Yes - outputs high-impedance if either VCC at GND |
| Internal Series Resistance | — | 4 kOhm |
| Latch-Up Performance | — | Exceeds 100 mA per JESD 78, Class II |
| Driver Type | — | Push-pull (totem-pole) CMOS only; not for open-drain buses |