UCC21530QDWKRQ1 vs UCC21710QDWRQ1 Comparaison
Comparaison détaillée côte à côte de UCC21530QDWKRQ1 par Texas Instruments et UCC21710QDWRQ1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
UCC21530QDWKRQ1 - 4A/6A 5.7kVrms Isolated Gate Driver | TI
UCC21530QDWKRQ1 ✓ ActifTexas Instruments
UCC21710QDWRQ1 - ±10A Isolated Gate Driver | TI | Automotive
UCC21710QDWRQ1 ✓ ActifComparaison des spécifications
| Paramètre | UCC21530QDWKRQ1 | UCC21710QDWRQ1 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,07 | $2,74 |
| Fonction | Isolated dual-channel gate driver | Single-channel isolated gate driver |
| Number of Channels | 2 (high-side / low-side) | — |
| Peak Source Current | 4 A | +10 A |
| Peak Sink Current | 6 A | -10 A |
| Isolation Voltage (RMS) | 5.7 kVRMS | — |
| Channel-to-Channel Spacing | 3.3 mm (minimum) | — |
| Creepage / Clearance | 8.5 mm (DWK wide-body) | — |
| VDD/VDDA Supply Range | 18 V to 25 V (3 V to 18 V on logic side per datasheet) | — |
| Propagation Delay (Typical) | 33 ns | — |
| Maximum Operating Frequency | 5 MHz | — |
| Common-Mode Transient Immunity (CMTI) | 100 V/ns (minimum) | — |
| Programmable Deadtime | Yes (DT pin) | — |
| Broche d'activation | Yes (active-low) | — |
| Plage de température de fonctionnement | -40C to +125C | -40 C to +150 C |
| Boîtier | 14-pin SOIC (DWK wide-body) | 16-SOIC (DW) wide-body |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 2 | — |
| AEC-Q100 Qualification | Qualified | — |
| Statut RoHS | Compliant | — |
| Logic Input Compatibility | CMOS / TTL | — |
| Isolation Technology | — | SiO2 capacitive coupling |
| Isolation Rating (rms) | — | 5.7 kVrms (reinforced) |
| Working Voltage (rms) | — | 1.5 kVrms |
| Target Switches | — | SiC MOSFETs up to 1700 V, IGBTs |
| Propagation Delay (typ.) | — | 60 ns |
| CMTI (min.) | — | 100 V/ns |
| Output Supply Voltage (VCC2/VEE2) | — | 12.8 V to 18 V |
| Input Supply Voltage (VDD/VCCI) | — | 3 V to 5.5 V |
| Protection Features | — | DESAT, Miller clamp, UVLO, FLT, soft turn-off |
| Automotive Qualification | — | AEC-Q100 |
| RoHS | — | Compliant |