UCC21710QDWRQ1 vs UCC21750-Q1 Comparaison
Comparaison détaillée côte à côte de UCC21710QDWRQ1 par Texas Instruments et UCC21750-Q1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
UCC21710QDWRQ1 - ±10A Isolated Gate Driver | TI | Automotive
UCC21710QDWRQ1 ✓ ActifTexas Instruments
UCC21750-Q1 - 10A Isolated SiC/IGBT Gate Driver | TI Automotive
UCC21750-Q1 ✓ ActifComparaison des spécifications
| Paramètre | UCC21710QDWRQ1 | UCC21750-Q1 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,74 | $3,45 |
| Fonction | Single-channel isolated gate driver | — |
| Isolation Technology | SiO2 capacitive coupling | SiO2 capacitive (galvanic isolation) |
| Isolation Rating (rms) | 5.7 kVrms (reinforced) | — |
| Working Voltage (rms) | 1.5 kVrms | — |
| Peak Source Current | +10 A | +10 A |
| Peak Sink Current | -10 A | -10 A |
| Target Switches | SiC MOSFETs up to 1700 V, IGBTs | — |
| Propagation Delay (typ.) | 60 ns | — |
| CMTI (min.) | 100 V/ns | — |
| Output Supply Voltage (VCC2/VEE2) | 12.8 V to 18 V | — |
| Input Supply Voltage (VDD/VCCI) | 3 V to 5.5 V | — |
| Protection Features | DESAT, Miller clamp, UVLO, FLT, soft turn-off | DESAT overcurrent/short-circuit, active Miller clamp, UVLO (input + output), fault report |
| Boîtier | 16-SOIC (DW) wide-body | 16-pin SOIC (DW) wide-body, 8.0 mm creepage/clearance |
| Plage de température de fonctionnement | -40 C to +150 C | -40C to +125C (automotive) |
| Automotive Qualification | AEC-Q100 | — |
| Type de montage | Surface Mount | Surface Mount |
| RoHS | Compliant | — |
| Driver Type | — | Single-channel isolated gate driver |
| Isolation Rating (Reinforced) | — | 5.7 kVrms |
| Maximum DC Operating Voltage | — | 2121 V DC |
| Supported Switch Types | — | SiC MOSFET, IGBT |
| Output-side Supply Voltage | — | [DATA_NEEDED: VCC range] |
| Input-side Supply Voltage (VDD) | — | [DATA_NEEDED: VDD range] |
| CMTI (Common-Mode Transient Immunity) | — | >100 V/ns (typical) |
| Propagation Delay | — | [DATA_NEEDED: typical tpHL / tpLH] |
| Isolated Analog-to-PWM Sensor | — | Yes (temperature or voltage sensing) |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| Statut RoHS | — | Compliant |