VND5160AJTR-E vs VNI4140KTR-32 Comparaison
Comparaison détaillée côte à côte de VND5160AJTR-E par STMicroelectronics et VNI4140KTR-32 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
VND5160AJTR-E - 3.8A Dual High-Side Driver PowerSSO-12 | STMicro
VND5160AJTR-E ✓ ActifSTMicroelectronics
VNI4140KTR-32 - Quad 1A High-Side SSR, 41V, PowerSSO-24 | STMicroelectronics
VNI4140KTR-32 ✓ ActifComparaison des spécifications
| Paramètre | VND5160AJTR-E | VNI4140KTR-32 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Motor Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,49 | $4,10 |
| Product Type | Double-channel high-side driver with analog current sense | — |
| Number of Channels | 2 | 4 |
| Topologie | High-side switch | High-Side Switch, N-Channel MOSFET |
| Continuous Output Current per Channel | 3.8 A | 1 A |
| Maximum Output Current (Pulsed) | 5 A | — |
| On-State Resistance (typ, per channel) | 160 mOhm | — |
| Nominal Supply Voltage | 13 V | — |
| Operating Supply Voltage Range | 4.5 V to 36 V | — |
| Technology | STMicroelectronics VIPower M0-5 | — |
| Configuration de sortie | 1:1 N-Channel (high-side) | — |
| Current Sense | Analog current sense output | — |
| Diagnostic Features | Open-load detection (on and off), STAT_DIS status flag, thermal shutdown, active VCC clamp, ISO7637 transient protection | — |
| Boîtier | PowerSSO-12 (12-pin, exposed pad) | PowerSSO-24 (Exposed Bottom Pad) |
| Operating Temperature Range (Automotive) | -40C to +150C (junction) | — |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | — |
| Lead-Free | Yes | — |
| Device Type | — | Quad High-Side Smart Power Solid State Relay |
| Supply Voltage Range | — | 10.5 V to 36 V |
| Maximum Operating Supply | — | 41 V |
| On-Resistance R_DS(on) (typ) | — | 0.08 ohm per channel |
| Plage de température de fonctionnement | — | -40 °C to +125 °C |
| Lead-Free / RoHS | — | Yes / Compliant |
| Integrated Protections | — | Overcurrent, Short-Circuit, Over-Temperature, Under-Voltage Lockout |
| Diagnostic Output | — | Yes (per-channel open-load, fault, thermal) |
| Charge Pump | — | Yes (integrated, for gate drive) |
| Fast Demagnetization of Inductive Loads | — | Yes (internal) |
| Conformance | — | IEC 61131-2 (industrial PLC outputs); ESD IEC ±25 kV |
| Niveau MSL | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |