VNH5180A-E vs VNH7070ASTR Comparaison
Comparaison détaillée côte à côte de VNH5180A-E par STMicroelectronics et VNH7070ASTR par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
VNH5180A-E - 41A Automotive H-Bridge Motor Driver | STMicroelectronics
VNH5180A-E ✓ ActifSTMicroelectronics
VNH7070ASTR - 15A Automotive H-Bridge Motor Driver | STMicroelectronics
VNH7070ASTR ✓ ActifComparaison des spécifications
| Paramètre | VNH5180A-E | VNH7070ASTR |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,39 | $3,16 |
| Output Current | 41 A (continuous) | — |
| Supply Voltage Range | 5.5 V to 18 V | — |
| On-Resistance (per switch) | 20 mOhm | — |
| PWM Frequency | Up to 20 kHz | — |
| Boîtier | PowerSSO-36 (16-pin) | SO-16N (MultiWatt-15 derivative, exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40C to +150C | -40 C to +150 C (junction) |
| Résistance thermique, jonction-ambiance | 30 C/W | — |
| Technology | VIPower M0-5 | VIPower M0-7 |
| AEC-Q100 Qualified | Yes | — |
| Undervoltage Lockout | Yes | — |
| Overvoltage Clamp | Yes | — |
| Arrêt thermique | Yes | — |
| Load Current Limitation | Yes | — |
| Diagnostic Output | Yes | — |
| CMOS Compatible Inputs | 3 V and 5 V | — |
| Statut RoHS | Compliant | Compliant |
| Motor Type | — | DC brushed motor |
| Configuration de sortie | — | Full H-bridge (dual high-side + dual low-side) |
| Supply Voltage (VCC) | — | 4 V to 28 V |
| Continuous Output Current | — | 15 A |
| On-State Resistance per Switch (Ron) | — | 40 mOhm (typical) |
| PWM Frequency (max) | — | 20 kHz |
| Logic Input Compatibility | — | 3.3 V and 5 V CMOS |
| Current Sense Output (CS) | — | Analog proportional voltage |
| Diagnostic Output (DIAG) | — | Active-high fault flag |
| Protection Features | — | UVLO, overvoltage clamp, thermal shutdown, short-circuit, open-load |
| Niveau MSL | — | 3 |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |