VNI4140K-32 vs VNQ500PEP-E Comparaison
Comparaison détaillée côte à côte de VNI4140K-32 par STMicroelectronics et VNQ500PEP-E par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
VNI4140K-32 - Quad High-Side Smart Power SSR 1A PowerSSO-24 | STMicroelectronics
VNI4140K-32 ✓ ActifSTMicroelectronics
VNQ500PEP-E - Quad Channel 500mA High-Side Driver | STMicroelectronics
VNQ500PEP-E ✓ ActifComparaison des spécifications
| Paramètre | VNI4140K-32 | VNQ500PEP-E |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,05 | $2,15 |
| Device Type | Quad high-side smart power solid-state relay | — |
| Number of Channels | 4 | 4 |
| Topologie | High-side switch (N-channel MOSFET) | — |
| Load Current per Channel | 1.0 A (continuous) | — |
| On-State Resistance (RDS(on)) | 0.08 ohm per channel | — |
| Supply Voltage (VCC) Max | 41 V | — |
| Configuration de sortie | 1:1 N-Channel | — |
| Nombre de sorties | 4 | — |
| Diagnostics | Per-channel open-load, short-to-ground, thermal fault | — |
| Inductive Load Handling | Fast demagnetization (integrated) | — |
| Logic Input Compatibility | CMOS/TTL compatible logic inputs | — |
| Boîtier | PowerSSO-24 (24-pin with exposed thermal pad) | PowerSSO-12 (PowerSO-12) with exposed pad |
| Package Width | 7.50 mm (approximately 0.295 inch) | — |
| Type de montage | Surface Mount | Surface Mount |
| Industrial Standard Compliance | IEC 61131-2 | — |
| ESD Rating | 25 kV (per IEC standard, air discharge) | — |
| Technology | ST VIPower (vertical DMOS + CMOS/bipolar control) | VIPower M0-3 |
| Fonction | — | Quad channel high-side driver |
| Configuration | — | High-side, non-inverting |
| Per-Channel Output Current | — | 500 mA continuous |
| Current Limit (per channel) | — | [DATA_NEEDED: typical current limit value] |
| On-Resistance RDS(on) | — | [DATA_NEEDED: per-channel RDS(on) in mOhm] |
| Supply Voltage Range (Vs) | — | 4.5 V to 36 V |
| Load-Dump Transient Tolerance | — | Up to 36 V (automotive rated) |
| Input Compatibility | — | CMOS-compatible logic inputs |
| Chip Enable | — | Yes, common enable for all 4 channels |
| Protection Features | — | Current limit, shorted load, overtemperature, undervoltage shutdown, loss of ground |
| Diagnostic Output | — | Status / fault feedback |
| Standby Current | — | Very low standby current |
| Température de fonctionnement | — | [DATA_NEEDED: junction temperature range] |
| Statut RoHS | — | Compliant |
| Lead-Free | — | Yes |