VNQ500PEP-E vs VNI4140K-32 Comparaison
Comparaison détaillée côte à côte de VNQ500PEP-E par STMicroelectronics et VNI4140K-32 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
VNQ500PEP-E - Quad Channel 500mA High-Side Driver | STMicroelectronics
VNQ500PEP-E ✓ ActifSTMicroelectronics
VNI4140K-32 - Quad High-Side Smart Power SSR 1A PowerSSO-24 | STMicroelectronics
VNI4140K-32 ✓ ActifComparaison des spécifications
| Paramètre | VNQ500PEP-E | VNI4140K-32 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,15 | $2,05 |
| Fonction | Quad channel high-side driver | — |
| Technology | VIPower M0-3 | ST VIPower (vertical DMOS + CMOS/bipolar control) |
| Number of Channels | 4 | 4 |
| Configuration | High-side, non-inverting | — |
| Per-Channel Output Current | 500 mA continuous | — |
| Current Limit (per channel) | [DATA_NEEDED: typical current limit value] | — |
| On-Resistance RDS(on) | [DATA_NEEDED: per-channel RDS(on) in mOhm] | — |
| Supply Voltage Range (Vs) | 4.5 V to 36 V | — |
| Load-Dump Transient Tolerance | Up to 36 V (automotive rated) | — |
| Input Compatibility | CMOS-compatible logic inputs | — |
| Chip Enable | Yes, common enable for all 4 channels | — |
| Protection Features | Current limit, shorted load, overtemperature, undervoltage shutdown, loss of ground | — |
| Diagnostic Output | Status / fault feedback | — |
| Standby Current | Very low standby current | — |
| Boîtier | PowerSSO-12 (PowerSO-12) with exposed pad | PowerSSO-24 (24-pin with exposed thermal pad) |
| Température de fonctionnement | [DATA_NEEDED: junction temperature range] | — |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | — |
| Lead-Free | Yes | — |
| Device Type | — | Quad high-side smart power solid-state relay |
| Topologie | — | High-side switch (N-channel MOSFET) |
| Load Current per Channel | — | 1.0 A (continuous) |
| On-State Resistance (RDS(on)) | — | 0.08 ohm per channel |
| Supply Voltage (VCC) Max | — | 41 V |
| Configuration de sortie | — | 1:1 N-Channel |
| Nombre de sorties | — | 4 |
| Diagnostics | — | Per-channel open-load, short-to-ground, thermal fault |
| Inductive Load Handling | — | Fast demagnetization (integrated) |
| Logic Input Compatibility | — | CMOS/TTL compatible logic inputs |
| Package Width | — | 7.50 mm (approximately 0.295 inch) |
| Industrial Standard Compliance | — | IEC 61131-2 |
| ESD Rating | — | 25 kV (per IEC standard, air discharge) |