ZM5101A-CME3R vs ZM5202 Comparaison
Comparaison détaillée côte à côte de ZM5101A-CME3R par Silicon Labs et ZM5202 par Silicon Labs. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Silicon Labs
ZM5101A-CME3R - Z-Wave 500 SiP Module, Sub-GHz, 8051 MCU | Silicon Labs
ZM5101A-CME3R ✓ ActifComparaison des spécifications
| Paramètre | ZM5101A-CME3R | ZM5202 |
|---|---|---|
| Marque | Silicon Labs | Silicon Labs |
| Catégorie | RF Modules | RF Modules |
| Statut du cycle de vie | Actif | NRND |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,81 | $10,95 |
| Fonction | Z-Wave 500 Series Wireless System-in-Package (TxRx + MCU) | — |
| RF Protocol | Z-Wave (Z-Wave Plus compatible) | — |
| Operating Frequency | 865.2 MHz to 926.3 MHz (868 MHz / 908 MHz / 921 MHz regional) | — |
| Output Power | 6 dBm (max) | approximately 4 dBm (typical) |
| Receive Sensitivity | -94.3 dBm at 100 kbps (some sources list -104 dBm at lower rate) | — |
| Débit de données | 100 kbps (max) | — |
| Tension d'alimentation de fonctionnement | 2.3 V to 3.6 V (typical 3.3 V) | — |
| Receive Current | 32 mA (typical) | — |
| MCU Core | Optimized 8051 | — |
| Flash Memory | 128 kB | — |
| SRAM | 16 kB | — |
| UART | 2 x UART up to 230.4 kbps | — |
| SPI | 2 x SPI up to 8 MHz | — |
| ADC | 4-channel 12/8-bit rail-to-rail, VDD/internal/external reference | — |
| Security | Hardware AES-128 engine | — |
| Dimmer Control | 1000-step dimmer | — |
| Boîtier | 56-TFLGA (Module), 8 mm x 8 mm x 1.2 mm | — |
| Type de montage | Surface Mount | Surface Mount |
| Packaging | Reel (R suffix) | — |
| RoHS | Compliant | — |
| Module Type | — | Z-Wave 500 Series RF Transceiver Module (PCB SiP-like module) |
| Inside the Module | — | SD3502 SoC with 8051 MCU core + Z-Wave RF transceiver + crystal + SAW filter + passives |
| Frequency Band | — | Sub-1 GHz ISM (908 / 908.42 / 916 MHz regional Z-Wave channels) |
| Receiver Sensitivity | — | -93.0 dBm (typical) |
| Modulation | — | Z-Wave FSK (per Z-Wave PHY specification) |
| Host Interface | — | GPIO / serial host interface to external MCU |
| GPIO Count | — | up to 32 GPIOs (sufficient for single-MCU designs) |
| Module Footprint | — | approximately 8 mm x 8 mm (PCB module) |
| Module Package Dimensions | — | 12.5 mm x 13.6 mm x 1.9 mm (per datasheet outline) |
| Tension d'alimentation | — | [DATA_NEEDED: supply voltage range from datasheet] |
| Température de fonctionnement | — | [DATA_NEEDED: operating temperature range from datasheet] |
| Backwards Compatibility | — | Pin/pad compatible with ZM3102 and ZM4102 modules |
| Regulatory | — | Module-level regulatory qualification to support end-product certifications |