1000 - Catalyst 1000 Series Managed Switch | Cisco
Référence : 1000 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $495 | $495,00 |
| 10 | $460 | $4 600,00 |
| 100 | $425 | $42 500,00 |
| 500 | $395 | $197 500,00 |
| 1 000 | $365 | $365 000,00 |
1000 Présentation
A managed Ethernet switch is a Layer 2 networking device that forwards Ethernet frames between connected devices using MAC-address learning, while exposing administrative interfaces for VLAN, QoS, port security, and PoE budgeting. Within the enterprise network hierarchy, the Catalyst 1000 sits at the access layer, sitting below distribution and core switches and aggregating edge endpoints such as workstations, IP phones, wireless access points, and IoT sensors.
Key features of the family include configurable PoE+ delivery, flexible port counts spanning Fast Ethernet and Gigabit Ethernet, support for Cisco IOS Software CLI and web UI management, intelligent traffic handling with QoS marking and classification, and an Enhanced Limited Lifetime Warranty (E-LLW) that adds next-business-day replacement hardware delivery and 90 days of 8x5 Cisco TAC support. Specific SKU variants such as the C1000-24P-4G-L deliver 24 PoE+ ports with 4 SFP uplinks suitable for branch-office access aggregation.
Technically, the Catalyst 1000 platform uses purpose-built switching ASICs combined with an ARM-based management processor to deliver wire-speed Layer 2 forwarding at line rate, while keeping management functions isolated from the data plane. The fixed managed form factor eliminates the modular failure modes of chassis switches, providing reliability for unattended branch deployments.
Typical applications include small-business access switching, branch-office LAN aggregation, IoT edge connectivity for sensors and controllers, Power over Ethernet delivery for IP phones and wireless access points, and quiet out-of-the-wiring-closet deployments. The C1000-24P-4G-L SKU is well suited to converged voice/Wi-Fi edge deployments where PoE+ budget and uplink density both matter.
When sizing a deployment, match the SKU's PoE budget to the aggregate draw of powered devices and confirm uplink type (SFP vs copper) against the upstream switch. For critical IoT deployments, verify the Enhanced Limited Lifetime Warranty terms and TAC support availability in your region.
Alternatives de remplacement direct pour 1000 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
C1000-24P-4G-L
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
C1000-24T-4G-L
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
C1000-48P-4G-L
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
C1000-8FP-2G-L
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
C1000-16T-2G-L
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
1000 Valeurs maximales et caractéristiques électriques
| Product Type | Fixed managed Layer 2 Ethernet switch (family) |
| Series | Cisco Catalyst 1000 Series |
| Switching Layer | Layer 2 |
| Port Speeds Supported | Fast Ethernet and Gigabit Ethernet |
| Operating System | Cisco IOS Software |
| Management Type | Managed (CLI and Web UI) |
| Form Factor | Fixed managed (non-modular) |
| Example SKU | C1000-24P-4G-L (24 PoE+ ports, 4 SFP uplinks) |
| Target Deployment | Small business and branch office access |
| Power over Ethernet | PoE+ supported on selected SKUs (SKU-dependent) |
| Traffic Management | QoS marking, classification, scheduling at wire speed |
| Warranty | Enhanced Limited Lifetime Warranty (E-LLW) |
| TAC Support | 90 days of 8x5 Cisco TAC included |
| Hardware Replacement | Next-business-day replacement where available |
| Typical Use Case | Access-layer switching for SMB and branch offices |
Guide de configuration des broches du 1000 access-layer switching for smb and branch offices
Configuration des broches du 1000 (boîtier access-layer switching for smb and branch offices). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour 1000.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
1000 convient pour 6 applications: Small Business Access Switching, Branch Office LAN Aggregation, IoT Edge Connectivity, Converged Voice and Wi-Fi Deployment, Out-of-Wiring-Closet Installation, Retail and Hospitality Network Access.
Small Business Access Switching
The Cisco Catalyst 1000 family provides enterprise-grade Layer 2 access switching sized and priced for small business deployments. Its flexible PoE+ and port combinations let a single SKU family support office desktops, IP phones, and wireless access points, while Cisco IOS Software provides a familiar CLI for IT staff. According to Cisco, the platform's Enhanced Limited Lifetime Warranty and next-business-day hardware replacement make it suitable for sites without dedicated on-site network engineering, and its wire-speed QoS marking ensures consistent performance for voice and video traffic even on uplinked branch connections.
Recommandé
Branch Office LAN Aggregation
Branch-office LAN aggregation benefits from the Catalyst 1000's combination of Layer 2 switching, flexible uplink types (SFP supported on most SKUs), and Cisco IOS management. The 4 SFP uplinks of the C1000-24P-4G-L enable fiber or Gigabit copper trunks back to a regional distribution switch, providing headroom for converged voice and Wi-Fi traffic. According to Cisco, the platform's intelligent traffic handling marks, classifies, and schedules data, voice, and video at wire speed, keeping latency and jitter low for branch users relying on centralized services.
Recommandé
IoT Edge Connectivity
IoT edge connectivity is a primary positioning of the Catalyst 1000 family per Cisco, supporting distributed sensors and controllers over Power over Ethernet and standard Ethernet. PoE+ delivery on SKUs like the C1000-24P-4G-L simplifies deployment of IoT endpoints by combining data and power on a single cable run. The switch's wire-speed QoS and Layer 2 isolation features provide predictable connectivity for time-sensitive IoT traffic, while Cisco IOS management centralizes firmware and policy updates across many distributed branch or retail sites.
Recommandé
Converged Voice and Wi-Fi Deployment
Converged voice and Wi-Fi deployments rely on switch infrastructure that delivers both PoE and QoS guarantees. The Catalyst 1000's support for PoE+ powering of Cisco IP phones and wireless access points, combined with intelligent traffic marking and scheduling at wire speed, makes it well suited to unified communications rollouts. According to Cisco, the platform's QoS capabilities keep voice and video traffic flowing smoothly even when the uplink is congested, reducing packet loss and jitter that would otherwise degrade call quality or wireless roaming.
Recommandé
Out-of-Wiring-Closet Installation
Out-of-the-wiring-closet installations are simplified by the Catalyst 1000's quiet fixed managed design and Cisco IOS Software stack, which does not require dedicated cooling or specialized mounting. Per Cisco, the platform is ideal for retail back offices, classrooms, and small clinic IDFs where a full wiring closet is unavailable. The Enhanced Limited Lifetime Warranty covers next-business-day hardware replacement where available, mitigating the risk of placing switches in less-protected spaces without on-site IT staff.
Recommandé
Retail and Hospitality Network Access
Retail and hospitality networks need reliable Layer 2 access switching with PoE for point-of-sale terminals, IP cameras, and Wi-Fi access points. The Catalyst 1000 family provides this with a fixed managed form factor that simplifies rollouts across many small sites. According to Cisco, the platform's intelligent traffic handling and wire-speed performance support the bursty traffic patterns of retail checkout and guest Wi-Fi, while Enhanced Limited Lifetime Warranty reduces total cost of ownership across multi-site deployments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 1000 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | C1000-24P-4G-L | C1000-24T-4G-L | C1000-48P-4G-L | C1000-8FP-2G-L | C1000-16T-2G-L |
|---|---|---|---|---|---|---|
| Brand | Cisco | Cisco | Cisco | Cisco | Cisco | Cisco |
| Package / Form Factor | Rack-mount 1U switch (fixed managed) | Rack-mount 1U switch (same family) | Rack-mount 1U switch (same family) | Rack-mount 1U switch (same family) | Compact fixed managed switch (same family) | Rack-mount 1U switch (same family) |
| PoE Support | SKU-dependent | PoE+ | Non-PoE | PoE+ | Full PoE+ | Non-PoE |
| Uplink Type | SFP (SKU-dependent) | 4 SFP | 4 SFP | 4 SFP | 2 SFP | 2 SFP |
| Switching Layer | Layer 2 | Layer 2 | Layer 2 | Layer 2 | Layer 2 | Layer 2 |
| Operating System | Cisco IOS Software | Cisco IOS Software | Cisco IOS Software | Cisco IOS Software | Cisco IOS Software | Cisco IOS Software |
| Warranty | Enhanced Limited Lifetime (E-LLW) | Enhanced Limited Lifetime (E-LLW) | Enhanced Limited Lifetime (E-LLW) | Enhanced Limited Lifetime (E-LLW) | Enhanced Limited Lifetime (E-LLW) | Enhanced Limited Lifetime (E-LLW) |
| Management Type | Managed (CLI + Web UI) | Managed (CLI + Web UI) | Managed (CLI + Web UI) | Managed (CLI + Web UI) | Managed (CLI + Web UI) | Managed (CLI + Web UI) |
Principaux différenciateurs
- Cisco IOS Software across the entire Catalyst 1000 SKU family (vs Generic SMB web-managed switches)
- Enhanced Limited Lifetime Warranty with next-business-day replacement (vs Basic 1-year or 3-year warranties on competing SMB switches)
- Wire-speed QoS marking, classification, and scheduling (vs Entry-level unmanaged or lightly-managed switches)
Notes de conception
When sizing a Catalyst 1000 deployment, calculate the aggregate PoE draw of all powered devices against the SKU's PoE budget before ordering. Underestimating draw leads to mid-deployment shortages where PoE shutdowns drop critical endpoints; overestimating wastes budget on over-spec SKUs. Always reserve 10-20% PoE headroom for future endpoints added during the warranty window.
Although the Catalyst 1000 is a complete switch and not a board-level component, physical deployment still requires attention to rack ventilation, ambient temperature, and power circuit capacity. Cisco specifies operating temperature ranges for the platform; verify the rack environment stays within limits and that redundant UPS coverage is in place for branch deployments where the E-LLW next-business-day replacement depends on clean power.
For out-of-the-wiring-closet installations, mount the switch on a stable surface with adequate clearance for the SFP cage dust caps and cable bend radius. Group powered devices (APs, phones, cameras) on PoE+ ports and reserve non-PoE ports for uplink trunks or non-powered endpoints to simplify PoE budget tracking. Label both ends of every patch cable, as the E-LLW hardware replacement process depends on fast on-site identification.
Informations de conformité
Compliance status reflects Cisco enterprise networking product standards; specific test reports should be requested from Cisco for individual SKUs before deployment in regulated environments.