10CL055YU484A7G - Cyclone 10 LP FPGA 55K LE | Intel | 484-FBGA
Référence : 10CL055YU484A7G ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $178.5 | $178,50 |
| 10 | $168.2 | $1 682,00 |
| 100 | $152.4 | $15 240,00 |
| 500 | $138.75 | $69 375,00 |
| 1 000 | $124.3 | $124 300,00 |
10CL055YU484A7G Présentation
A Field-Programmable Gate Array (FPGA) is a programmable semiconductor that allows designers to implement custom digital logic, memory blocks, and DSP functions after manufacturing. FPGAs sit in the broader hierarchy: programmable logic -> logic IC -> integrated circuit, and serve as a flexible alternative to ASICs for medium-volume designs. Cyclone 10 LP FPGAs target cost-sensitive, power-constrained applications such as industrial motor control, video bridging, and I/O expansion.
Key features of the 10CL055YU484A7G include 55,856 logic elements for combinational and sequential logic, 2,396,160 bits (approximately 2.29 Mbit) of embedded SRAM, embedded 18x18 multipliers for DSP, a 3.3 V LVCMOS/LVTTL I/O standard set, and dedicated PLL clock networks. The device supports configuration via serial flash, JTAG, or AS mode, and is offered in the industrial -40C to +85C operating range for this A7G speed grade.
Architecturally, the Cyclone 10 LP family uses logic array blocks (LABs), adaptive logic modules (ALMs), and embedded memory blocks (M9K) arranged in a fabric optimized for low static and dynamic power. The 484-pin UBGA package offers high signal density and excellent thermal performance for compact boards, while the A7G speed grade balances timing margin with cost.
Typical applications include industrial machine vision, video processing bridges, motor control, embedded display controllers, and IoT edge gateways. The 321 user I/Os are sufficient for parallel RGB interfaces, multi-channel ADC capture, and multi-protocol bridging (UART/SPI/I2C/GPIO).
When designing with this device, ensure configuration flash is properly selected (EPCS or compatible) and that the Quartus Prime toolchain matches the device family. Thermal analysis should consider the UBGA substrate - adequate PCB copper and via stitching below the BGA are required to maintain junction temperature within limits.
This page synthesizes distributor pricing, drop-in alternatives from the same Cyclone 10 LP family, and practical design notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour 10CL055YU484A7G — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec 10CL055YU484A7G (même facteur de forme et même empreinte) — différant par Package, Speed Grade, Process Technology, Logic Elements (LE), Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
10CL055YU484I7G
✅ Remplacement direct✓ En stock
$35.1 / unité
Voir la fiche technique →10CL055YU484C8G
✅ Remplacement direct✓ En stock
$63.8 / unité
Voir la fiche technique →10CL055YU484C6G
✅ Remplacement direct✓ En stock
$24.38 / unité
Voir la fiche technique →10CL040YU484A7G
✅ Remplacement direct✓ En stock
$56.8 / unité
Voir la fiche technique →10CL055YF484I7G
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$46.09 / unité
Voir la fiche technique →10CL040YU484I7G
✅ Remplacement direct✓ En stock
$48.75 / unité
Voir la fiche technique →10CL055YU484A7G Valeurs maximales et caractéristiques électriques
| Series | Cyclone 10 LP |
| Logic Elements | 55,856 LE |
| Embedded Memory | 2,396,160 bits (2.29 Mbit) |
| Number of User I/Os | 321 I/O |
| Package Type | 484-UBGA (Ultra FineLine BGA) |
| Type de montage | Surface Mount (SMD/SMT) |
| Operating Supply Voltage (Core) | 1.2 V |
| I/O Standard Support | LVCMOS / LVTTL (3.3 V, 2.5 V, 1.8 V, 1.5 V) |
| Minimum Operating Temperature | -40 C |
| Maximum Operating Temperature | +85 C (industrial) |
| Speed Grade | A7 (standard performance) |
| Embedded 18x18 Multipliers | Yes (DSP blocks) |
| Configuration Method | Serial / JTAG / Active Serial (AS) |
| Statut RoHS | Compliant |
| Process Technology | 60 nm |
Guide de configuration des broches du 10CL055YU484A7G 484-ubga (ultra fineline bga)
Configuration des broches du 10CL055YU484A7G (boîtier 484-ubga (ultra fineline bga)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour 10CL055YU484A7G.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
10CL055YU484A7G convient pour 6 applications: Industrial Motor Control, Video Bridging and Processing, Industrial Machine Vision, IoT Edge Gateway, Embedded Display Controller, Industrial Networking Switch.
Industrial Motor Control
The 10CL055YU484A7G is well-suited for multi-axis industrial motor control where its 55,856 logic elements can implement multiple PID control loops, encoder quadrature decoders, and PWM generation channels concurrently. With 321 user I/Os, the FPGA can interface directly with multiple encoder channels, Hall sensors, gate drivers, and communication peripherals (EtherCAT, CAN, RS-485) without external glue logic. The 1.2 V core and Cyclone 10 LP low-power architecture reduce thermal dissipation in enclosed industrial cabinets. The 484-UBGA package provides high-density signal access for 4-axis AC drive or stepper systems. Estimated: typical 4-axis servo design consumes 35-45K LE, leaving headroom for safety logic and diagnostics.
Recommandé
Video Bridging and Processing
The 10CL055YU484A7G supports parallel RGB video bridging, HDMI-to-LVDS conversion, and frame-rate conversion pipelines with its 2.29 Mbit embedded memory providing line buffer storage. The 321 user I/Os accommodate 24-bit RGB buses plus control signals for typical 1080p LCD panels. Embedded 18x18 multipliers enable on-the-fly color space conversion and scaling. The Cyclone 10 LP architecture provides deterministic latency for real-time video pipelines. Estimated: 1920x1080 line buffer requires approximately 620 Kbit, fitting within the available 2.29 Mbit alongside double-buffering.
Recommandé
Industrial Machine Vision
The 10CL055YU484A7G delivers sufficient logic density for image preprocessing pipelines including Bayer demosaicing, thresholding, and blob detection in factory automation. The 321 user I/Os support Camera Link base configuration or parallel LVDS image sensor interfaces. The 2.29 Mbit embedded memory enables line buffering for sensors up to 4K resolution. The -40C to +85C industrial temperature range suits factory floor deployment. Estimated: typical 2MP sensor preprocessing consumes 20-30K LE plus 1 Mbit memory, leaving substantial fabric for application-specific analysis.
Recommandé
IoT Edge Gateway
The 10CL055YU484A7G serves as a protocol-bridging gateway connecting legacy industrial buses (Modbus, PROFIBUS, RS-485) to modern Ethernet and wireless networks. Its 55,856 LE enables simultaneous operation of multiple protocol stacks plus encryption and message queuing. The 321 user I/Os accommodate multiple UART/SPI/I2C peripherals and Ethernet PHYs. The low-power Cyclone 10 LP architecture reduces thermal load in DIN-rail mounted gateways. The 1.2 V core voltage simplifies power supply design for fanless enclosures.
Recommandé
Embedded Display Controller
The 10CL055YU484A7G drives TFT LCD panels with integrated timing controller, gamma correction, and backlight management functions in compact HMI designs. The 321 user I/Os provide ample connectivity for RGB888 parallel interfaces, SPI touch controllers, and GPIO for backlight/keypad. The 2.29 Mbit embedded memory supports frame composition and OSD overlays. The 484-UBGA package fits behind large display PCBs with BGA-compatible reflow profiles. Estimated: 7-inch 800x480 panel controller consumes 15-25K LE plus 500 Kbit frame buffer.
Recommandé
Industrial Networking Switch
The 10CL055YU484A7G implements a managed industrial Ethernet switch with PTP (IEEE 1588) timestamping, VLAN tagging, and Quality-of-Service prioritization. The 55,856 LE support 8-12 port switch fabric plus management stack. The 321 user I/Os accommodate MII/RGMII PHY interfaces, serial management, and status LEDs. The low-latency fabric ensures cut-through switching performance. The Cyclone 10 LP low static power reduces thermal load in fanless switch designs.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 10CL055YU484A7G — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | 10CL055YU484I7G | 10CL055YU484C8G | 10CL055YU484C6G | 10CL040YU484A7G | 10CL040YU484I7G |
|---|---|---|---|---|---|---|
| Package | 484-UBGA | 484-UBGA - same | 484-UBGA - same | 484-UBGA - same | 484-UBGA - same | 484-UBGA - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 55,856 LE | 55,856 LE | 55,856 LE | 55,856 LE | 40,000 LE | 40,000 LE |
| Embedded Memory | 2.29 Mbit | 2.29 Mbit | 2.29 Mbit | 2.29 Mbit | 1.68 Mbit | 1.68 Mbit |
| User I/Os | 321 I/O | 321 I/O | 321 I/O | 321 I/O | 321 I/O | 321 I/O |
| Speed Grade | A7 (industrial) | I7 (industrial, faster) | C8 (commercial) | C6 (commercial, faster) | A7 | I7 |
| Operating Temperature | -40C to +85C | -40C to +100C | 0C to +85C | 0C to +85C | -40C to +85C | -40C to +100C |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Estimated Unit Price (qty 1) | $178.50 | $195.00 | $168.00 | $182.00 | $145.00 | $158.00 |
Principaux différenciateurs
- Mid-density Cyclone 10 LP with optimal LE-to-cost ratio (vs 10CL040YU484A7G)
- Industrial A7 speed grade balances cost and timing margin (vs 10CL055YU484I7G)
- UBGA package for highest signal density in compact boards (vs 10CL055YF484I7G (FBGA))
Notes de conception
The 484-UBGA package relies on PCB thermal vias and copper planes for heat dissipation. Estimated: a fully utilized 10CL055YU484A7G with 80% logic utilization and 200 MHz operation dissipates approximately 1.5-2.0 W. Design PCB with at least 4 thermal vias (0.3mm drill, 1oz copper plating) directly beneath the BGA thermal pad area, connected to inner ground planes. For enclosed industrial enclosures without airflow, add heatsink attachment points.
UBGA packages with 0.8mm pitch require PCB design with 0.4mm or smaller via-in-pad technology for signal escape routing. Use laser-drilled micro-vias or via-in-pad with filled and plated-over copper to prevent solder wicking. Maintain 50-ohm controlled impedance for high-speed LVDS and clock traces. Route all differential pairs with matched length tolerance under 150 mil. Decoupling: place 0.1uF X7R ceramic capacitors at every power pin within 100 mil.
Do not confuse U484 (UBGA, 0.8mm pitch) with F484 (FBGA, 1.0mm pitch) packages - they have different ballmaps despite both having 484 pins. Verify package code matches your PCB footprint before ordering. The A7 speed grade timing margins are tighter than I7; design with sufficient setup/hold slack. Configuration flash must be EPCS or compatible serial flash - verify JTAG chain includes all devices if using multi-device programming.
For high-speed LVDS or DDR-style external memory interfaces, place series termination resistors at the FPGA driver within 200 mil of the BGA ball. Use IBIS simulation in Quartus Prime to verify signal integrity. For clock distribution, dedicate PLL outputs and minimize skew by matching trace lengths within 50 mil. Avoid routing sensitive analog signals (if any) adjacent to high-frequency switching nets.
Informations de conformité
RoHS and REACH compliant per Intel product environmental documentation. Not AEC-Q100 qualified - the 10CL055YU484A7G targets industrial applications, not automotive.
